• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Drum help

L & R
Shop deals on ebay
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Gtrubicon

Gtrubicon

50 Cal.
Joined
Jun 19, 2021
Messages
1,401
Reaction score
2,428
Hello,Last week I received a brand new 32 cal barrel made by Ed Rayl. It’s 3/4” across the flats and has a breach plug installed. I want to install a powder drum and build a percussion rifle. My question is, does anyone make a drum smaller than 7/16” diameter to fit such a small barrel? I’m going to order a Davis Goulcher lock without provision for a drum so i can file to fit. 7/16 diameter powder drums are readily available, would that look ok on this barrel? The flats of the barrel are right at 5/16”. It’s ready to draw file and finish. The stock is also on its way, I ordered a Vincent style half stock from Pecatonica, I only had them inlet the barrel channel and ramrod. I have looked and have not found much in the way of smaller powder drums. Any leads or advice is much appreciated.
 

Attachments

  • A10C4C42-9D4B-4186-964A-AC05718B51D7.jpeg
    A10C4C42-9D4B-4186-964A-AC05718B51D7.jpeg
    2.3 MB
Any one who can run a lathe can make a drum. The problem you may run into by making a smaller one is that it will be too small to hold the nipple. I'd just install the drum you have and not worry about it being a little larger than the barrel flat. It sounds like you're starting off on a neat project.
 
I’m looking forward to getting going on it. I should have the stock in 2 weeks, I’m going to place an order today at Track for some of the little stuff. I’m going to make my own trigger guard, toe plate, side plate and such.
 
I like all the suggestions, thanks. I ordered a 1/2’ drum. I like the idea of filing a flat for the nipple and possible shaping it some.
 
Another question, what nipple size should I thread the drum for, I’d like it to be set up for nipples that are readily available. I was thinking 1/4x28. What say you?
 
This is an interesting project. Looking forward to following along. Must be planning on it being pretty heavy with needing casters!
 
Last edited:
I see pics of lots of quality custom rifles where the edge of the drum is above the corner of the octagon barrel - where the drum meets the barrel. Looks OK to me and I'd rather have a nice thick drum with full nipple threads than a small one that is thinner.
 

Similar threads

1BadDart
LH Thread drum?
Replies
5
Views
405
1BadDart
1BadDart
A
Which powder drum
Replies
18
Views
996
Antelope Pete
A
M
FOR SALE Pistol kit FS
Replies
3
Views
938
skoda
S
A
More powder drum issues
2
Replies
28
Views
2K
Antelope Pete
A
W
cva/Douglas barrels on mountain rifle
Replies
15
Views
621
Frontier's
Frontier's

Latest posts

Back
Top