• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What Muzzleloading Stuff Did You Do Today?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Success with my flintlock today. 50 grains Goex 3f, .480 ball, .010 patch. All shots went off like a champ, no issues. Hit 50/75/100 yd steel targets and in a 30-40 mph wind to boot. So happy doesn't even begin to describe how I spent my 67th birthday. Perseverance pays. :)

View attachment 326801
Oh yeah, Happy Birthday old man!🤭
 
Success with my flintlock today. 50 grains Goex 3f, .480 ball, .010 patch. All shots went off like a champ, no issues. Hit 50/75/100 yd steel targets and in a 30-40 mph wind to boot. So happy doesn't even begin to describe how I spent my 67th birthday. Perseverance pays. :)

View attachment 326801
Congrats to you sir.a day well spent. Like the pic
 
Took the 62 cal Underhammer to the range for a test run of some .600 ball. 80 grains of 2F Goex and some Joann Fabric drill cloth lubed with balistol/water mixture. 50 yards. New peep sight too. Skinner Lo-pro.
 

Attachments

  • IMG_2751.jpeg
    IMG_2751.jpeg
    466.9 KB · Views: 0
  • IMG_2752.jpeg
    IMG_2752.jpeg
    191.3 KB · Views: 0
  • IMG_2753.jpeg
    IMG_2753.jpeg
    639.9 KB · Views: 0
Braved the heat and shot the new SMR for the first time. Luckily the humidity is low today but still hot. I started out with 30 grains of Swiss 3F, .350 RB, .018 PT, and Goex 4F prime.
I also used a thin Dawn/water spray for lube, sponging off any excess with a paper towel. Then tried 35 grains of Swiss. I’m pleased for a first outing, still lots of experimenting to do before I touch the sights. The rifle performed perfectly, nice, fast ignition. And what really surprised me was that I had zero fouling problems. I shot a couple of times offhand at my steel targets so a total of 16 shots without swabbing and the last loaded as easy as the first. Was pleasantly surprised to see how little fouling there was on the patch after I finished. Not sure whether it was the bore polish I did or the Dawn/water lube that minimized the fouling, probably a combination of the 2. Picked up a few of the ball patches and they looked fine.
The .018 patches were all I had to choose from. I bought a pack of precut .020, but they compressed to only .016. I’m going to cut out some true .020’s for the next outing. Wanted to shoot some more but the heat finally stopped the fun. Now to get her cleaned up.
Looking good.
 
what do you mean the tube split?

Quite literally it split.

The non-spout end of the brass pan primers (i.e. Traditions and the clones) are usually push fit and the tube is weaker than the end cap. The box it was stored in was out in an unheated garage, so all it would have taken is a little condensation or a fast transition...any moisture or differential cooling could cause excess stress and bam...a crack forms at that end and propagates down (I don't know if it was a single action or not, but end to end the tube was straight line split).
 
Yesterday, Wednesday, I had the pleasure to shoot muzzle loaders with my friend BigAl, a contributor on this site.
Shooting a flintlock or percussion gun is fun on its own. Shooting with a good friend makes it even better.
I shot with a beautiful, claro walnut stocked, Vincent (or Ohio style) 45 cal, percussion cap rifle. I also brought a 42 inch barrel Schimmel flintlock rifle, but didn't have the time to shoot it.
Al brought a very nice woodsrunner Kibler rifle.
Al is a much more experienced black powder shooter and has given me helpful tips over the last several years. I started this captivating hobby when I was in my 60s. Al has been shooting these historic firearms much longer.
Today, Thursday, I still have a big grin on my face from a Wednesday morning well spent.
This is a photo of the Vincent rifle sent to me by the individual I purchased it from. It was such a nice photo that I used it. I hope I didn't violate any rule by using the photo second hand.
Ohio finished by James Tawneysm.JPG
 
Presented my granddaughter with her (belated) birthday gift. Just completed CVA Frontier kit (2000 vintage). Since I was sick throughout much of the visit we weren't able to hit the range but she will be back again this summer so we can do an intensive training session.

Only one grandchild left to go! 😀

20240612_084423_copy_600x800.jpg
 
Yesterday, Wednesday, I had the pleasure to shoot muzzle loaders with my friend BigAl, a contributor on this site.
Shooting a flintlock or percussion gun is fun on its own. Shooting with a good friend makes it even better.
I shot with a beautiful, claro walnut stocked, Vincent (or Ohio style) 45 cal, percussion cap rifle. I also brought a 42 inch barrel Schimmel flintlock rifle, but didn't have the time to shoot it.
Al brought a very nice woodsrunner Kibler rifle.
Al is a much more experienced black powder shooter and has given me helpful tips over the last several years. I started this captivating hobby when I was in my 60s. Al has been shooting these historic firearms much longer.
Today, Thursday, I still have a big grin on my face from a Wednesday morning well spent.
This is a photo of the Vincent rifle sent to me by the individual I purchased it from. It was such a nice photo that I used it. I hope I didn't violate any rule by using the photo second hand.
View attachment 327317

Perfectly acceptable photo and a very pretty rifle!

We are sorta neighbors. I'm in Arvada. What range did you shoot at?
 
Perfectly acceptable photo and a very pretty rifle!

We are sorta neighbors. I'm in Arvada. What range did you shoot at?
I shoot at the Ft. Lupton range, home to the Ft. Lupton Muzzleloaders Club. The range is a few hundred yards from the rebuilt old fort.
I go up to Arvada frequently to play with the Jefferson County Community Band. We practice at the Arvada United Methodist Church.
 
I took a handful of the newly cast .562 balls for an outing today to the Townsville range. The Parker Hale 1853 loves them with 60gns of FFFG Wano, an overthrow of semolina and a .018 square cut spit patch (.580 in total) - this target bench rested. And, yes, I know; not true rifled musket shooting, is it? But sure is fun to see that group take shape from 50 metres away. Mr Piggy is in trouble!

Oh, sights are all original, as issued - aiming point with a fine sight is at six o'clock at the point of the front leg, there's 15 balls in the group.

Now, to cleaning.

Cheers, Pete

Mr Pig (2).JPG
 

Latest posts

Back
Top