Working on a stand and implements for my friend’s new swivel gun.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Swivel gun stand and implements
- Thread starter Keyhole
- Start date
Help Support Muzzleloading Forum:
- Joined
- Sep 3, 2021
- Messages
- 564
- Reaction score
- 1,037
Well your a good friend. Nice work, take a picture of the cannon mounted if possible.
- Joined
- Jul 5, 2012
- Messages
- 2,263
- Reaction score
- 3,625
No worm?
Waiting on the worm head to be delivered. I have the handle ready
Last edited:
What is the spoon one for powder????
Yes sir, my friend isn’t able to make powder bags so I made him a ladle that he can use to put his powder in the cannon
Best thing to do is make him powder bags thats the way it was done plus it is a whole lot safer.
That certainly would be easier for him. We’ll see….
That would be best and I forgot to say you do excellent work, looking at your work I know you could make him some nice powder bags
Thank you sir, he's a great guy and I wanted to do something nice for him.
Here’s his 1.75" bore swivel gun replica mounted on the stand. He wanted the stand to be burned and clear-coated, and at wheel chair height. I also surprised him with a bench top stand in tribute to his service in Vietnam. He can use that one at his local range.
.
Last edited:
I've always wondered how swivel guns with any kind of mount absorbed recoil. Carronades had slides and regular cannons wheels, but what of swivels?
The tall stand teeters some but doesn’t fall. If you hold on to the tiller and aim her it just bumps you a little.
The bench top stand is heavy and smooth on the bottom….she slides back about 3 inches when you fire the cannon
That’s what I do w/ my golf ball sized swivel gonne - use a large wooden block - but I glued 80-grit sand paper to the bottom & it barely moves.
Nice work BTW on your friend’s set of tools! As seen below, mine is a breech loader model & so far I’ve found no need for a worm.
Last edited:
