• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Large Confederate Style Bowie

shop deals on amazon
the hawken shop
Shop deals on ebay
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Runewolf1973

Runewolf1973

The Crown & Cutlass
MLF Sponsor
Joined
Oct 3, 2018
Messages
329
Reaction score
796
Location
Red Deer, Alberta, Canada
Up for consideration is this hand forged bowie I recently finished. The blade is 1075 high carbon steel, 12" long by 2" wide, with a 3/16" thick spine and an overall length of 17". The handle is maple with a robust, one-piece through tang design just like the originals, peened at the end and given a distressed, aged finish. The handle was also carefully carved to give it the look of age-related cracks and splits, but it is a perfectly solid, single piece of hard maple. It comes complete with a leather scabbard. Asking $265 USD with shipping included to US and Canada.

Military veterans and First Responders get an additional 15% off.

Thanks for looking!

Screenshot_20240730-192540.png
Screenshot_20240730-192214.png
Screenshot_20240730-195616.png



Just had to edit the post a bit because I want the details to be as specific as possible since this is a high quality reproduction and a I fully stand behind all my workmanship.
 
Last edited:
Secesh said:
What is the blade thickness?
Click to expand...

Sorry, I forgot to add that. The blade is 3/16" thick. The balance point is about 2" forward of the guard so it feels very nimble and iIt has a nice blade geometry that you could (if you wanted to) slice carrots without them flying off the counter.
 
Last edited:
Smokey Plainsman said:
Is the sheath historically correct? I was under the impression those types of copper leather rivets were not around during the ACW.
Click to expand...
I'm not 100% sure on the copper rivets, but if it is not historically accurate, I will make another sheath without the rivets at no extra charge to anyone who buys it.
 
Smokey Plainsman said:
Is the sheath historically correct? I was under the impression those types of copper leather rivets were not around during the ACW.
Click to expand...

Yes, historically correct. Below is a photo of a copper rivet excavated/plowed up in Pollard, Alabama at the site of a Confederate training camp. The rivets were used on pistol holsters, belts and harnesses.
IMG_2980.jpeg
 
That is really nice for the price kind surprised it hasn't sold yet.
How is edge retention any idea how hard it is?
 
AlexB said:
That is really nice for the price kind surprised it hasn't sold yet.
How is edge retention any idea how hard it is?
Click to expand...

I just reduced the price. Was previously asking $350, but then realized with the exchange rate to Canadian dollars, I can get away with charging less and still make the effort put into making a knife like this worthwhile. As far as edge retention, anything that I've made with 1075 has been a good, reliable cutter and chopper. It's probably one of the best steel choices for a knife of this sort. Tough as nails.
For specific hardness, I'm not 100% sure because I heat treat out of a forge and try to do things in a more traditional way, but I would suspect it falls around 58-59 RC for hardness because you can barely mark it with a file. I've never had a customer encounter an issue to my knowledge, but if ever there were, I stand behind my work and would make things right. Customer satisfaction is more important to me than anything.
 
Last edited:
TonyF said:
Runewolf1973
Respectfully offer $200 for the Bowie.
Can pay via PPFF or Zelle,
Thanks for your consideration.
Tony
Click to expand...

Thanks for the offer, but I know I am already underselling myself on this knife and I'm sure other makers would agree. If it doesn't sell in the next week or so, it will be putting it in an upcoming show. It would look fantastic next to my guns..
 
Status
Not open for further replies.

Similar threads

Runewolf1973
  • Locked
SOLD Large French Boucheron/trade knife
Replies
2
Views
597
Runewolf1973
Runewolf1973
Runewolf1973
  • Locked
SOLD English Trade Knife
Replies
4
Views
720
Speedo
S
Runewolf1973
  • Locked
SOLD French inspired trapper's knife
Replies
5
Views
619
Runewolf1973
Runewolf1973
Runewolf1973
  • Locked
SOLD Hudson Bay Camp Knife **Sale Pending**
Replies
11
Views
1K
Runewolf1973
Runewolf1973
Runewolf1973
  • Locked
SOLD English style trade knife
Replies
3
Views
1K
Runewolf1973
Runewolf1973

Latest posts

Back
Top