• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Coehorn Mortar

Shop deals on ebay
L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks for posting this. Excellent job.
The Missouri state museum in the state capitol building had a confederate mortar on display for decades. It was made from a large log with a steel/iron bore and very heavy bands around the outside of the log. Memory fails me as to what the story was regarding the piece. Anyway ..enjoyed your post. Thanks.
 
Sean,
Is one handle on each side of the mortar beds sufficient for lifting one of those things up?
 
zulu said:
Sean,
Is one handle on each side of the mortar beds sufficient for lifting one of those things up?
Click to expand...

Michael,

Yes it seems to be, the posts that the handles are set with are about 4" deep into the wood. I cheated somewhat and added some construction adhesive into the holes to help increase its strength. I have picked it up with one handle and they didn't move at all. That said the bed by itself is about 90 pounds so I won't be doing it often! They are unwieldy pieces of kit!
 
Brought the mortars to our first event!

Proofed the tubes with a slow fuse. We went to do some more drilling with them but the vent meets the powder chamber at the very, very rear of the chamber and the rounds I made didn't fit that. So I'll work on making a round thats more cylindrical in shape on the bottom to better fit the chamber.

Quick photos, I'll add some video in a while.

445586373_659948486291879_6368358514470469379_n.jpg441010385_474565845043959_8364966792283676934_n.jpg
 
More work to be done, the way I made the cartridges really doesn't lend themselves to sliding into the chamber well, the bottom of the powder chamber is concave, so some more work needs to be done to make the bottom of the cartridge more cylindrical to fit well. These will be fun once we get that dialed in!
 

Similar threads

I
FOR SALE At the Risk of looking like a flake....A&K Cannon 1960's For Sale
Replies
19
Views
3K
irtmks
I

Latest posts

Back
Top