So three moves after I initially started this build I have the time to finish browning the barrel. The first time looked bad so I started over. Now I have found that an animal has chewed through the parts ziplock and I'm missing screws, bolts, rods, and the nipple and closing screw. Does anyone know where I can acquire a detailed parts diagram and parts list for a Traditions Kentucky Long Rifle percussion kit? Or if you know the bolt threading for the barrel cap and lock bolts, I can probably wing it from there.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Finally finishing Kentucky kit, if you can help
- Thread starter iroczepp
- Start date
Help Support Muzzleloading Forum:
You might try searching ebay. I found a parts kit for a Traditions Kentucky percussion pistol there. Traditions does sell parts for their kits but they're kind of hit and miss on what they've got in stock, and if you have to wait until their inventory gets replenished you might be waiting a while. You cannot order online; you have to call them. See their website for contact info.
I'll check eBay, I emailed traditions for a diagram and parts list and asked if I could reorder some parts. We'll see what they say. I was really hoping to get this done soon as I have everything prepared finally, except #11 caps. That may be a challenge as well.
Give Traditions a call. I needed a new ramrod thimble once and their customer service helped me out.
Will they not respond to at email?
That is helpful but the nose cap screw config is incompatible on that diagram. On mine there are 2 that screw the cap to the barrel. One through upper hand guard, one above it.
Try calling, they are nice to deal with.
Yes, you're more likely to get a response with a phone call. The number is published on the website.
I don't know. Their phone number was printed in the kit booklet, so I called.
Similar threads
Latest posts
-
-
Looking for shooters in Georgia.
- Latest: maillemaker
-
-
-
-
-
-
-
-
FOR SALE Investarm Lyman Cabelas in .45 Hawken rifle with peep sights- Latest: hunter thompson