need help with 44 cal muzzleloaded pistol loading

Eterry · Sep 3, 2024

.50 + 11 said:
I've got a .50 cva single shot. Just found my powder. Soon to find .490 balls. Found powder: 777 fffg. Any thoughts beyond that? Thank you!

Rather than hijack this thread feel free to start your own. Things tend to get less confusing that way.

Packrat · Sep 3, 2024

I looked at the pictures, now I wonder why The Bradford Exchange hasn't come up with a special design

Garbear34 · Sep 3, 2024

You can use up the pyrodex rifle shotgun powder in it 20 to 25 grains powder. I have a traditions kentucky pistol in 50. I use what is in my horn of ffg in my kentucky rifle and pistol

.50 + 11 · Sep 5, 2024

Eterry said:
Rather than hijack this thread feel free to start your own. Things tend to get less confusing that way.

Thank you and my apologies. I don't know how to start a thread so I will just apologize again. Sorry.

CyrusP · Sep 5, 2024

DS8U · Sep 6, 2024

Eterry said:
If you can't find the right size balls at the store, try www.trackofthewolf.com.
You can get a few balls of the correct size. If the barrel is marked 44 caliber, you'll need a ball smaller than .435", .433" preferred.

.433 balls and .010 patches (for .40 to .49cal) will work?

Eterry · Sep 20, 2024

DS8U said:
.433 balls and .010 patches (for .40 to .49cal) will work?

Sorry I've been away from my desk.
Yes the .433 balls should do fine. If the .010 patches are too tight get some fabric from a fabric store. Take your patches with you for comparison.

DS8U · Sep 20, 2024

Eterry said:
Sorry I've been away from my desk.
Yes the .433 balls should do fine. If the .010 patches are too tight get some fabric from a fabric store. Take your patches with you for comparison.

I want to thank you and everyone else. The gun fired just fine with these. Decently enough accurate too for round balls.
Also surprisingly quiet.
And I bought some black powder cleaning solution and cleaned in nicely

SeaBee133 · Sep 22, 2024

DS8U said:
I want to thank you and everyone else. The gun fired just fine with these. Decently enough accurate too for round balls.
Also surprisingly quiet.
And I bought some black powder cleaning solution and cleaned in nicely

Okay, that was Friday, this is Sunday… Clean it again on Monday. Including pulling the percussion nipple and running a couple pipe cleaners through it.
If the cleaning patch comes out clean the first time, you are out maybe 15 cents and 5 minutes. If it comes out iffy/funky, keep going until it is clean. Then repeat in 3 days.

I just brought a ,54 rifle back from a 10 year nap. Fired one blank (powder and a few cleaning patches), cleaned it. Cleaned it again 3 days later. Will clean it again Tuesday. Why? Cleaning supplies, including oil/bore butter type rust inhibitor are cheap. Barrels and locks are expensive.

Happy shooting!

need help with 44 cal muzzleloaded pistol loading

Help Support Muzzleloading Forum:

Eterry

75 Cal.

Packrat

45 Cal.

Garbear34

40 Cal

.50 + 11

32 Cal

CyrusP

45 Cal.

DS8U

32 Cal

Eterry

75 Cal.

DS8U

32 Cal

SeaBee133

40 Cal

Similar threads

Latest posts

need help with 44 cal muzzleloaded pistol loading

Help Support Muzzleloading Forum:

75 Cal.

45 Cal.

40 Cal

32 Cal

45 Cal.

32 Cal

75 Cal.

32 Cal

40 Cal

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!