Testing .44 Caliber Stepped Chambers

nkbj said:

Not so far. The .452" diameter portion of the chambers is 3/8" deep. That depth was chosen as midrange guesstitmate after measuring various .45 pistol and revolvers molds. The engagement between the bullets and the .450" portion of the chambers has been sufficient with maxed out charges to hold those 237 grain round nosed bullets in place. I'd expect that sooner or later I'll try one that doesn't work, a bullet design sized to .451" and powder charge that lets the bullet slip forwards.
So far it looks as though it's a good thing that I didn't go with a bigger difference in diameters. When seating the bullets into that little bit of neck down you can feel a good bit of resistance.
There's some conical nosed bullets made up and ready to go that are longer than the round noses though they're actually a little lighter in weight. Going to be a point of interest to see how much resistance they provide and what their smooshed noses look like after being seated. There's some .454 or .457 round ball around here too that I need to hunt up.

Click to expand...

nkbj said:

PS,
I haven't tried Triple Seven yet. That stuff just might create enough recoil impulse to make heavier bullets jar loose. And maybe some barrel leading too.

Click to expand...

Bad Karma said:

I’ll bet it’s close to spot on at 50 yards too… also, on several revolvers now I’ve turned a flat inside of the ram so all soft lead or even 30:1 alloy projectiles have a flat meplat after ramming home.

Click to expand...

rodwha said:

I’d like to know more about what you’ve done. I know of only one other who’s modified the ram, though his approach was epoxy.

Click to expand...

M. De Land said:

I've used a ball mill to put a hemisphere in several percussion revolvers with odd shaped ram faces.

Click to expand...

rodwha said:

I really don’t like the strange face my Pietta Remington NMA has, but I want a ram face that won’t distort my very large meplat when loading. A fellow on a now defunct forum had been dealing with this and made a face with epoxy, as well as one for the same bullet but with a hollow point design that was working quite well for him. It always makes me think of the old Speer Flying Ashtray of the late 80’s but with lead.

Click to expand...