Most Track flints I've bought have more humps than a flock of camels. 
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Track of the Wolf
- Thread starter Mike in FL
- Start date
Help Support Muzzleloading Forum:
- Joined
- Dec 25, 2011
- Messages
- 9,335
- Reaction score
- 4,514
Just get a bench grinder green wheel from Grainger for sharpening carbide tools and grind the hump off. Keep a bowl of water handy for dipping them so they stay cool and don't get hot enough to crack on you. I do it with bare fingers so I have to keep dipping them as they get hot. Wear a dust mask!
Last edited:
This is why I always pick my flints out in person at Log Cabin Sport Shop or at an event.
I too like the flatter flints because there is more room for the leather or lead with more of the jaw screw holding everything solidly.
bldtrailer
Pilgrim
if you sand, grind or file flints DON'T breather the dust it's micro glass that will cut your lung tissue
use a good filter mask or make a water slurry to keep dust out of the air you breath
when I knap/make gun flints I do it outside with a cross breeze or a fan blowing away the micro partials
use a good filter mask or make a water slurry to keep dust out of the air you breath
when I knap/make gun flints I do it outside with a cross breeze or a fan blowing away the micro partials
Last edited:
- Joined
- May 2, 2019
- Messages
- 35
- Reaction score
- 31
I have run into this many times myself. Flints from all over and even many original ones from the 18th and 19th century. What kind of diamond file would one use?? rotary?
westrayer
40 Cal
My closest ML shop is an hour away. To make the trip worthwhile I try to pick up a few when I go there for anything else. Currently looking for #11 caps and it seems these will require a trip, so I plan on picking up a few more.
Something like this is what I use and works great to get a good flat surface
Attachments
- Joined
- May 2, 2019
- Messages
- 35
- Reaction score
- 31
One thing I wanted to mention here, I have often dug revolutionary. Plants out of the sand down in the Savannah Georgia area. Many of the blonde flints that originated in Germany or Austria and found their way here tend to be entirely pyramidal. They have no flat on the top at all. This is partially because many of the Austrian and early French muskets, had a very straight frizzen. It sticks up at almost a 90Ā° angle. If you clamp one of these weird pyramid shaped flints into the hammer, it will strike at the correct angle to slide down that vertical frizzen and not just break into pieces. I have always assumed, that many of the blonde ones were cut that way. Some of the later ones that are nibbled around the back like most French flints, and are probably French Marine issue are perfectly flat on top. So it's an all together different thing.
Great post, thanks.
I just received 10 flints from TOW. Every one of them is excellent. Perfectly shaped and thickness is perfect. Thought I would give some very current feedback.
