-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Patch Lube Latest and Greatest
- Thread starter flatcreek
- Start date
Help Support Muzzleloading Forum:
Well, it shouldn't freeze up on you anyway. Looks like it's working.
flatcreek
40 Cal
Ok I cleaned it, it seemed like a lot more dirt came out a lot quicker. I'm thinking it may have loosened crud up that was in the barrel. Anyway cleanup wasn't a problem. Looked down the barrel with a Teslong scope and the bore looked as clean or cleaner than it has before. Like to see some others try this and hear what they think, it's about 11 bucks at Wally world, so if it works out it's cheap and maybe you'll get lucky and get some caps while your there.
Last edited:
Fouling, not dirt
flatcreek
40 Cal
I call anything that's dirty coming out of my barrel"dirt". I'm sorry that's not what you call it. The more important thing is what do you or other readers know about using propylene glycol antifreeze for patch lube. I'm just trying to turn my fellow BP enthusiast on to something that may possibly benefit them.
Last edited:
I believe glycols oxidize to acidic compounds and break down under heat more readily . Probably fine short term and followed with prompt and thorough cleaning, but years of use will probably not end well. Someone smarter than me will hopefully chime in.
Only 10 shots! C’mon man!
Hoppe’s Black Powder Cleaner & Patch Lube
FWIW I shoot in the top 10 shooters at the NE Flintlock Championship every year for the past few years, posting a top score 100-yard target every year and I’ll shoot anywhere from 80 to 120 shots in a day with it and NEVER have to swab between shots.
At my age … it’s my vision that inhibits my scoring placement, not the gun nor the load …
Hoppe’s Black Powder Cleaner & Patch Lube
FWIW I shoot in the top 10 shooters at the NE Flintlock Championship every year for the past few years, posting a top score 100-yard target every year and I’ll shoot anywhere from 80 to 120 shots in a day with it and NEVER have to swab between shots.
At my age … it’s my vision that inhibits my scoring placement, not the gun nor the load …
Just an FYI if you have pets. Make sure you don't spill that anywhere where it can puddle slightly. It tastes like candy to dogs and cats and will kill them dead in short order.
flatcreek
40 Cal
Could of shot many more I'm sure , I don't know if I would of made 80 or 100. 10 was all I had time for as I had to get my grandson off the bus.
Last edited:
flatcreek
40 Cal
Pretty sure that's ethylene glycol not propylene glycol. It is actually used in medicine and makeup.
After 20-years of use, Stumpy's Moose Snot by forum member @Stumpkiller is the best I've used. Doesn't freeze, doesn't run, as long as I can feel it with my finger on the opposite side of the patch that's being rubbed in its "wax shoe-polish" consistency, I never have to do a cleaning wipe. If it loads a bit hard then I just have to use more patch lube on the next patch and keep shooting. It's also made out of ingredients that were all available (different brands perhaps) in the 1700's and 1800's.
Here's an earlier post about it that gives the recipe and method for making it yourself:
https://www.muzzleloadingforum.com/threads/patch-lube.183132/post-2666237
morehops52
50 Cal.
I use a simple lube of olive oil and beeswax. Last week at the range I shot 20 Maxis and no cleaning . could have shot a lot more. There are so many more "simple' lubes recommended i don't feel the need to reformulate anything.
My sweet cat loves anything sweet, so I'd have to keep him away. He's an angel. He loves muzzleloaders.
You must be an electrician
Pure bear grease or bear oil. Depends on the bear being rendered and the ambient temperature.
Yea
25 years. Everyone's afraid to touch that stuff to. Need gloves and all..
You know then they put it on the wire a little bit and there afraid to you know really lube it up good like that..
Last edited:
Yup @flatcreek, you're correct. I thought it said ethylene glycol and when I saw it was anti-freeze didn't look any closer. Evidently it's not as toxic as Ethylene Glycol and is often found in "Pet Safe Anti-freeze" but it is still toxic to pets.
Just googled it and found the following from the Pet Poison Control Page of the American College of Veterinary Pharmacists.
"Propylene Glycol
Propylene glycol is found in many household products and has a significant toxic risk if ingested by pets. Of note, it is commonly found in ‘pet-safe’ anti-freeze products. While this form of anti-freeze is less toxic than those containing ethylene glycol, these products still pose a risk to pets if ingested."
They do have a chart on how much consumption is toxic the various size dogs. Toxic levels may result in death.
Here are some highlights:
• 0.135 of an ounce (4ml) is toxic for 1 to 10-lb dogs such as a Yorkie or Chihuahua
• 3.6 ounces (106ml) is toxic for a 27 to 40-lb dog such as a Beagle or Scottish Terrier
• 5.65-ounces (17ml) is toxic for a 41 to 70-lb dog such as a Cocker Spaniel or Boxer
• 12.58-ounces (372ml) is toxic for 91 to 110-lb. dogs such as a Great Dane or St. Bernard.
You can see the page with more info at https://vetmeds.org/pet-poison-control-list/propylene-glycol/#!form/PPCDonations
The biggest problem with the Ethylene Glycol is/was that it tastes good to pets and they lap it up, easily reaching toxic levels. No idea how that Propylene Glycol tastes and not about to volunteer to try it out!
If you're a fan of MSDS pages required by OSHA here's a link to one for propylene glycol
https://www.fishersci.com/msdsproxy...tNo=P355-4+&vendorId=VN00033897&storeId=10652
That page does advise against: Food, drug, pesticide or biocidal product use.
Also the flash point of it is not very high at 210.2°F - so beware of sparks.
Auto-ignition though is at 752°F so that shouldn't be a concern
Those MSDS pages always have more info than you ever thought you'd need.
- Joined
- Mar 13, 2020
- Messages
- 7,470
- Reaction score
- 20,922
- Location
- On the Border in Idaho looking at BC
grave yard dead! and horrible time getting dead.
Similar threads
