• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WANTED Just looking for now?

Shop deals on ebay
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Two Feathers

Two Feathers

62 Cal.
MLF Sponsor
Joined
Apr 14, 2008
Messages
2,920
Reaction score
3,102
Location
Berwick, Pa. Columbia county
Howdy folks:
I'm just looking for now, but does anyone have an old CVA, Dixie,or Jukar .45 or .50cal. flint long rifle kit or kit pieces laying around the attic or garage that could be made into a FrankenGun. I'm looking for one with Barrel Wedges NOT barrel pins. I had a .45 flint Jukar 2 piece long rifle with the barrel pins and every time I shot it, I had to pull the pins for cleaning and they got harder and harder to replace. Eventually I destroyed the stock.:~((((
Like I said, right now it's just an inquiry. I'm pretty old, in horrible health, and I can't shot organized shoots anymore so I just want one for fiddlin' with to hopefully make a shootable rifle? I'm not long for this earth or rich enough to buy a Kibler.
Thank you.
God bless:
Two Feathers
 
May want to check eBay as I have seen the parts you are looking for posted, except for wedges. I had in the late 70's, flintlock and it vanished. But, I just picked up a 45 cal. CVA kit that has been put together but it is a cap for 150.00. And I just found a flintlock for 75 bucks on this site. Good luck.
 
Two Feathers said:
Howdy folks:
I'm just looking for now, but does anyone have an old CVA, Dixie,or Jukar .45 or .50cal. flint long rifle kit or kit pieces laying around the attic or garage that could be made into a FrankenGun. I'm looking for one with Barrel Wedges NOT barrel pins. I had a .45 flint Jukar 2 piece long rifle with the barrel pins and every time I shot it, I had to pull the pins for cleaning and they got harder and harder to replace. Eventually I destroyed the stock.:~((((
Like I said, right now it's just an inquiry. I'm pretty old, in horrible health, and I can't shot organized shoots anymore so I just want one for fiddlin' with to hopefully make a shootable rifle? I'm not long for this earth or rich enough to buy a Kibler.
Thank you.
God bless:
Two Feathers
Click to expand...
I've got some pistol parts. Laminated stock with brass hardware and lock. Also an 11" breached barrel with a wedge. It'll take a bunch of fiddling. $125 shipped.
nit wit said:
I have never seen one with wedges.
NW
Click to expand...
 
Two Feathers said:
Howdy folks:
I'm just looking for now, but does anyone have an old CVA, Dixie,or Jukar .45 or .50cal. flint long rifle kit or kit pieces laying around the attic or garage that could be made into a FrankenGun. I'm looking for one with Barrel Wedges NOT barrel pins. I had a .45 flint Jukar 2 piece long rifle with the barrel pins and every time I shot it, I had to pull the pins for cleaning and they got harder and harder to replace. Eventually I destroyed the stock.:~((((
Like I said, right now it's just an inquiry. I'm pretty old, in horrible health, and I can't shot organized shoots anymore so I just want one for fiddlin' with to hopefully make a shootable rifle? I'm not long for this earth or rich enough to buy a Kibler.
Thank you.
God bless:
Two Feathers
Click to expand...
Why were you pulling the pins for cleaning?
 
MDH said:
I've got some pistol parts. Laminated stock with brass hardware and lock. Also an 11" breached barrel with a wedge. It'll take a bunch of fiddling. $125 shipped.
Click to expand...
MDH:
Thank ya. kindly, but I have a Jukar .45 cal. perc. pistol here. I really wanted a flint rifle.
God bless:
Two Feathers
 
FVRago said:
May want to check eBay as I have seen the parts you are looking for posted, except for wedges. I had in the late 70's, flintlock and it vanished. But, I just picked up a 45 cal. CVA kit that has been put together but it is a cap for 150.00. And I just found a flintlock for 75 bucks on this site. Good luck.
Click to expand...
FVRago:
Thank you brother. I'll keep lookin'.
God bless:
Two Feathers
 
French Colonial said:
Why were you pulling the pins for cleaning?
Click to expand...
I was gettin' water in between the lock and stock and it destroyed the stock. I was used to cleaning my TC Hawken where I could remove the barrel and clean it in a bucket.
Never had any luck cleaning my flint WITHOUT removing the barrel. I know guys say you don't have to, but I always did.
Thanks:
Two Feathers
 
Two Feathers said:
I was gettin' water in between the lock and stock and it destroyed the stock. I was used to cleaning my TC Hawken where I could remove the barrel and clean it in a bucket.
Never had any luck cleaning my flint WITHOUT removing the barrel. I know guys say you don't have to, but I always did.
Thanks:
Two Feathers
Click to expand...
For future reference, disassemble the gun and apply a good sealer to all the internal wood, two or more coats if your anal, before reassembly coat the bottom of the barrel and thimbles etc. that never see daylight with RIG or similar long term storage rust preventative.
Reassemble the gun and never pull the pins again.
 
Two Feathers said:
Howdy folks:
I'm just looking for now, but does anyone have an old CVA, Dixie,or Jukar .45 or .50cal. flint long rifle kit or kit pieces laying around the attic or garage that could be made into a FrankenGun. I'm looking for one with Barrel Wedges NOT barrel pins. I had a .45 flint Jukar 2 piece long rifle with the barrel pins and every time I shot it, I had to pull the pins for cleaning and they got harder and harder to replace. Eventually I destroyed the stock.:~((((
Like I said, right now it's just an inquiry. I'm pretty old, in horrible health, and I can't shot organized shoots anymore so I just want one for fiddlin' with to hopefully make a shootable rifle? I'm not long for this earth or rich enough to buy a Kibler.
Thank you.
God bless:
Two Feathers
Click to expand...
Hope you have fun with the project! Fiddling around with black powder stuff is a good way to keep busy!
 
I put this rifle together from parts of several CVA guns. Silver Hunter flintlock barrel, Bobcat sights, Frontier stock and brass furniture, the trigger is from a Kentucky pistol and the lock is a used L&R rpl 01.
I think it ran somewhere around $ 400.00 total for the parts.
20240928_115952.jpg
 

Similar threads

ajbennettnc
  • Locked
SOLD CVA Dikar Colonial Percussion Pistol kit
Replies
7
Views
406
BruceHuxford
BruceHuxford
Jon93
  • Locked
WITHDRAWN .45 Jukar rifle REDUCED
Replies
3
Views
491
Jon93
Jon93
Jappo
  • Locked
SOLD Jukar Spain 45 cal Pistol $155
Replies
4
Views
606
Jappo
Jappo
RobertIN
  • Locked
SOLD Kibler Colonial .54 rifle. Extra Fancy Maple. $1475 shipped/insured.
2
Replies
22
Views
3K
RobertIN
RobertIN
Relic shooter
SOLD - Pending funds Custom Flintlock Pistol .45 cal.
Replies
5
Views
1K
Relic shooter
Relic shooter

Latest posts

Back
Top