Vent hole location?

the hawken shop
Shop deals on ebay
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If you want to open the pan to more “center” the hole (I would), this is my suggestion:
C8F2BBC5-C996-40E8-A430-748F38ABDEBA.jpeg


I do this to many of my pans. Reasoning: to increase surface area to “catch” the sparks.
6944E8BB-D697-4738-B40C-4747384DAEE4.jpeg
 
smoothshooter said:
Tell me about this eccentric bush.
I have a gun that the vent is almost 1/16” too high. The Chambers vent hole is partially visible above the pan cover when it is closed. No ignition problems; just looks bad and exposes vent hole to the elements.
Who could do this kind of work?
Is this something Bobby Hoyt could do?
Click to expand...
It wouldn't be hard to machine a 'blank' vent plug; then position the vent as 'favourable' as possible then relieve the inside - a lot would depend on the diameter of the plug. I'm in NZ I don't know Bobby Hoyt - but by the number of times his name comes up he sounds capable. But as some have said if it works ok as is, then there's no real problem?
 
Bucks Co said:
It wouldn't be hard to machine a 'blank' vent plug; then position the vent as 'favourable' as possible then relieve the inside - a lot would depend on the diameter of the plug. I'm in NZ I don't know Bobby Hoyt - but by the number of times his name comes up he sounds capable. But as some have said if it works ok as is, then there's no real problem?
Click to expand...
Ignition is great.
Having the upper part of the vent show above the closed pan cover would kill the resale value.
Also I don’t like having the vent opening exposed to the elements.
 

Attachments

  • ml-howdah-flintlock-20.jpg
    ml-howdah-flintlock-20.jpg
    160.4 KB
If you haven't bought it, I wouldn't. Based on what little I see, the builder did a pretty poor job with inletting and architecture... aside from lock and touch hole placement. I imagine the rest of the gun follows suit.

I also can't imagine why someone would sell their favorite deer hunter.

My two cents.
 

Similar threads

Dusty_Traveler
  • Locked
SOLD 36” bbl left hand trade gun
Replies
3
Views
360
brushblind
brushblind
M
Need Id Advice and more, TC Penn Hunter
Replies
4
Views
1K
Eric Krewson
Eric Krewson
T
Pedersoli flintlock not cocking
2
Replies
31
Views
1K
westrayer
W
B
Pedersoli 50 Cal Flintlock Vent liner hole.
Replies
1
Views
380
SDSmlf
SDSmlf
M
TC Pennsylvania Hunter Issue
2
Replies
21
Views
1K
Rebel bull
R

Latest posts

Back
Top