I have taken that under advisement and will do a better job next time. I just wasn't all that proud of my shooting.
Old Shepherd
Old Shepherd
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Stykbow
50 Cal.
- Joined
- Aug 2, 2021
- Messages
- 1,092
- Reaction score
- 2,570
You don’t have to be proud of your shooting. Just be proud that you’re shooting!
Today, I had the opportunity to talk about early American firearms at the fall state meeting of the Kentucky Society U.S. Daughters of 1812 held at First Vineyard Winery near Nicholasville, KY. Yes...all 4 black powder guns were "NOT" loaded and "yes" the ladies were interested in the history of those guns!
Ring shank nails. That's a great idea. Thank You
How d0 you like shooting the Charle Haffner nightmare target ? The one with the crow and groundhog . Always gave me a fit . Thanks for sharing.
- Joined
- Sep 24, 2024
- Messages
- 11
- Reaction score
- 18
How do I find these 2 shops
Welcome too the Forum Mr Powell
The Log Cabin shop is in Lodi Ohio
And Deer Creek is in Walden Indiana..
The Log Cabin is actually a black powder gun shop while Deer Creek is more of a mail order or Internet service.
They do have a small display area, but not what I wold call a shop.
I hope this helps you somewhat..
There’s always Dixie Gun Works down here in Tennessee as well…
I hope you find what you’re looking for and I’m sure your Granddaughter will cherish it from now on.
Good Luck
Smo
PS
Deer Creek does set up in Tip Curtis’s old building at Friendship during the Spring & Fall shoot
The Log Cabin shop is in Lodi Ohio
And Deer Creek is in Walden Indiana..
The Log Cabin is actually a black powder gun shop while Deer Creek is more of a mail order or Internet service.
They do have a small display area, but not what I wold call a shop.
I hope this helps you somewhat..
There’s always Dixie Gun Works down here in Tennessee as well…
I hope you find what you’re looking for and I’m sure your Granddaughter will cherish it from now on.
Good Luck
Smo
PS
Deer Creek does set up in Tip Curtis’s old building at Friendship during the Spring & Fall shoot
Google them
- Joined
- Nov 14, 2010
- Messages
- 1,252
- Reaction score
- 1,702
Did you bring the Mrs along
longcruise
70 Cal.
longcruise
70 Cal.
So far today I I've coned another barrel. This one is my TC 45 barrel that has done very well in local matches. I'm coning it enough to make it easier to start a tight combo. This gun has never cut patches but I did do the old thumb round off trick after coning.
Before
after
445 ball. Of course it doesn't drop in like this with a patch.
I also am trying a mod to the sights. I outlined the rear sight the same way. Too bright??? I have a lot of acrylic paints so maybe a continuing experiment.
Before
after
445 ball. Of course it doesn't drop in like this with a patch.
I also am trying a mod to the sights. I outlined the rear sight the same way. Too bright??? I have a lot of acrylic paints so maybe a continuing experiment.
Stykbow
50 Cal.
- Joined
- Aug 2, 2021
- Messages
- 1,092
- Reaction score
- 2,570
@longcruise I like the white paint on the sight. I tried white on mine too, but I couldn’t see it very well. I went to a bright pink color so it wouldn’t match any other color in the woods.
Absentmindedly began filing on my SMR trigger to get some slop in the front trigger... Was filing on the front trigger bar by mistake... Now it won't go off just pulling the front trigger, set only. I'm a big ol dummy. Jim is probably tired of my emails by now 
longcruise
70 Cal.
I was kinda wondering about that. I chose white because in the last match I shot the target was mostly black and the backboard is black celotex. A sight picture was near impossible. I had to form a sight picture on the brown berm below the backboard and then try to transport the sight picture to the target.
If it works with the white I'm going to try some other colors as well.
Thanks for the tip.
longcruise
70 Cal.
I feel for you but I've made sooo many similar mistakes that I can't resist responding with:Absentmindedly began filing on my SMR trigger to get some slop in the front trigger... Was filing on the front trigger bar by mistake... Now it won't go off just pulling the front trigger, set only. I'm a big ol dummy. Jim is probably tired of my emails by now
- Joined
- Oct 6, 2020
- Messages
- 1,664
- Reaction score
- 2,753
My brother used a whitish glow in the dark paint on his front sight. In the evening it gives him 10-15 min more in the woods.
Also, finished it. Just need to file some grooves in the end of the ramrod and stain it. Now that I look at it, probably need to file the guard where it meets the trigger plate so it sits flush. Gotta love the little things you notice when you think you're finished lol.
Last edited:
Double post
Last edited:
Triple post 
Last edited:
As Andy Stumpf says, we don't make mistakes we make tuition payments. Learning has occurred lol. The lesson here is "Pay attention dummy!"I feel for you but I've made sooo many similar mistakes that I can't resist responding with:
Similar threads
