• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

DIY Defarbing and Refinishing

Shop deals on ebay
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Secesh said:
That’s a mighty fine looking blue on that Remington!

Have you ever tried a Nitre blue with that setup? A cylinder and screws in Nitre blue would be beautiful contrasting against the dark frame and barrel.

Great work!
Click to expand...
NO! NO! NO!!!! :oops::oops::oops: Do not nitre blue anything that is tempered or is a load bearing element!

Nitre bluing requires something like 750 degrees to do right. That will destroy a cylinder or frame.

New guns that are "Nitre Blued" or "Charcoal Blued" are no better than the "Color Case Hardening" that is done these days. It is in name only. It is cosmetic only!

I cringe when I see some well-meaning poster demonstrating how to "heat blue" a gun part buy lightin' 'er up with the torch, and maybe dropping it in oil. Do not do that either.

Screws are fine I suppose, but I would rust blue or hot oxide blue only, and rust blue is too much work!
 
Just to add to this thread. How would one age brass to make it look like aged original brass? There is just something very mellow about old brass that has aged well. It is not stained, colored, but soft and rich in appearance. Just look at some originals and you know what I mean. Is it possible to recreate this?
 

Attachments

  • Original Griswold and Gunnison.png
    Original Griswold and Gunnison.png
    893.5 KB
Frod733 said:
Just to add to this thread. How would one age brass to make it look like aged original brass? There is just something very mellow about old brass that has aged well. It is not stained, colored, but soft and rich in appearance. Just look at some originals and you know what I mean. Is it possible to recreate this?
Click to expand...
I know what you mean; I'm sure many have used the commercial "Brass Black", but the aging you illustrate is something that only time can perform! :)
 
Frod733 said:
Just to add to this thread. How would one age brass to make it look like aged original brass? There is just something very mellow about old brass that has aged well. It is not stained, colored, but soft and rich in appearance. Just look at some originals and you know what I mean. Is it possible to recreate this?
Click to expand...
Kibler has some tips on his website.
 
I've stripped and stained a few muzzle loader stocks; the light colored, urethane, replicas that don't look right as "out of the box". Much more authentic looking re-finished.
 
I aged some by getting a plastic container with a lid. Get a piece of wood or plastic or anything to make a platform to put inside the container to put your brass pieces on. Then make a mixture of vinegar, hydrogen peroxide and table salt. I never measured the amounts I just mix whatever proportions. Add it to the bottom of the container but make sure it’s below the platform you set the brass on. Put the brass parts on your platform and close the lid. Leave it there for awhile and check the finish once in awhile. When you get the finish you like take the parts out and rinse them off and your done. You can heat the container with a lamp or something a bit to speed things along. I’ll post a picture to show you how mine came out.
 

Attachments

  • image.jpg
    image.jpg
    2.2 MB
I see the idea triggers people off. Sure to each their own but me I do not get it.
 

Similar threads

Blackpowderart
First attempt at "antiqueing" the 1858
Replies
13
Views
954
Smokey Plainsman
Smokey Plainsman
C
ASM year???
Replies
8
Views
674
SDSmlf
SDSmlf
G
I think I know the model of this cap & ball replica, but not the manufacturer.
Replies
16
Views
696
Jappo
Jappo
M
Double checking the arbor end fit on my 2022 Pietta 51
Replies
2
Views
575
earlwb
E
Jappo
  • Locked
SOLD SOLD PP - Pietta 1860-1851 Parts
Replies
6
Views
711
Jappo
Jappo

Latest posts

Back
Top