- Joined
- Oct 6, 2020
- Messages
- 1,637
- Reaction score
- 2,670
Way to get the nerves out of the way on a small buck! Next one will be a big one with an arrow through its heart!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Norman Brooks
45 Cal.
Well I think I found out how badly accuracy suffers from a very fouled barrel at 50 yards. Lesson learned: DO NOT LEAVE YOUR CLEANING PATCHES AT HOME WHEN SIGHTING IN A NEW RIFLE!
First three shots form the triangle to the right. Adjusted the sight to center the grouping and hit just low but centered. Fine with that for deer I don't want to file the tiny SMR sight down any further.
New target started hitting the edge of the paper, then started missing paper altogether. Forced myself to make three spit patches out of pre-lubed patches (do not recommend, yuck) and they came out crusty filthy with fouling. After that started hitting in the black again. Losing daylight and ten shots without so much as a wipe had me off the paper.
First three shots form the triangle to the right. Adjusted the sight to center the grouping and hit just low but centered. Fine with that for deer I don't want to file the tiny SMR sight down any further.
New target started hitting the edge of the paper, then started missing paper altogether. Forced myself to make three spit patches out of pre-lubed patches (do not recommend, yuck) and they came out crusty filthy with fouling. After that started hitting in the black again. Losing daylight and ten shots without so much as a wipe had me off the paper.
I finally made it to the Elk River Long Rifles match in Tullahoma, TN this Saturday. it was great to shoot with that bunch again. My gear worked wonderfully only disgraced by my shooting. More practice at the Chattanooga range is in the works. Works better that way!
- Joined
- Oct 6, 2020
- Messages
- 1,637
- Reaction score
- 2,670
I only saw owls and squirrels!!
Dang. Ive never seen done before. Thats a good way of doing it.You a smart man. Ive never melted lead for balls before. Im real clumsy and accident prone. Thanks for showing this.
Hope i dont get hammered for asking because i honestly dont know.I know that it has to be pure lead to make the balls. But how can you tell difference between the two?
Hoping you see a deer the next time you go.Dang got a feeling i aint going be able to climb a tree this year due to my back.But now my back aint hurting as bad but my right leg is hurting bad. Dang recon im getting wore out. Be safe
Made a short video about the funnel cap I 3D printed and may sell in the classifieds. I'd be happy to make some for other brands if they're different threads from Scheutzen but that's all I have on hand.
There's lots of topics on the adverse effects of zinc when melted with lead.
https://www.muzzleloadingforum.com/threads/wheel-weight-lead-question.174865/page-3#post-2679927
https://www.muzzleloadingforum.com/threads/wheel-weight-lead-question.174865/page-4#post-2687731
https://www.muzzleloadingforum.com/threads/wheel-weight-lead-question.174865/page-2#post-2531415
Keep your melting pot just at the melting temperature for lead. Zinc has a higher melting temperature and will float to the top of the pot to be skimmed away.
https://www.muzzleloadingforum.com/threads/wheel-weight-lead-question.174865/page-3#post-2679927
https://www.muzzleloadingforum.com/threads/wheel-weight-lead-question.174865/page-4#post-2687731
https://www.muzzleloadingforum.com/threads/wheel-weight-lead-question.174865/page-2#post-2531415
Keep your melting pot just at the melting temperature for lead. Zinc has a higher melting temperature and will float to the top of the pot to be skimmed away.
Gordoncourtney
50 Cal.
- Joined
- Feb 19, 2021
- Messages
- 1,285
- Reaction score
- 2,288
Thank you smo for your kind words, I got the unused .36 double at Holts London auction , then 2 years later , some old unused 28g cartridge barrels came up, managed to convert them to muzzle loading and they actually fitted. Not shot them yet. It’s obviously a very well made reproduction rifle. Holts put it at 1885 but I think it’s 1924 by midland gun company definitely pre war as their factory was bombed to piecesI understand Sir..
I live in rural area in Tennessee and have been very fortunate to have shot many deer.
Our landscape is mostly rolling hills & hollows , some areas have heavy cover.
Which the deer seek during our Fall hunting season.
View attachment 360902
This pic is one of my hides/ stands I hunt from during bad weather..
Most road kill around my parts don’t lay long enough to become bloated….
It’s raining in Tennessee today ….
We needed it…
Very nice double gun Sir…
So some better photos
Attachments
Gordoncourtney
50 Cal.
- Joined
- Feb 19, 2021
- Messages
- 1,285
- Reaction score
- 2,288
Well not quite muzzle loading , I made a pig sticker bayonet for my 1851 Feldstutzer. Swiss and it was happy on the wall , yesterday I hanging another gun on the wall and got speared just like a pig . Actually it did not hurt. Ha ha. Some of the guns are rebuilt relics only a few are of any value and shootable
Attachments
One of my ROA revolvers was shooting 5-6” high with the rear sight as low as it would go. A friend of mine said he would make a front sight that fits right over the existing sight. Picked it up yesterday and it fits over the front sight vey nicely and adds @1/8” to the height. The square top piece is solid so I can file it down a bit.
Used blue loctite to keep it on and when I confirm it works I will use red loctite to fix it more permanently. He also told me if I file it down he would make another sight that I the same height as my final test sight.
He makes these for SASS shooters and says they don’t come off when using red loctite.
Used blue loctite to keep it on and when I confirm it works I will use red loctite to fix it more permanently. He also told me if I file it down he would make another sight that I the same height as my final test sight.
He makes these for SASS shooters and says they don’t come off when using red loctite.
For that past 2 months I've been working an outage at the mill so I haven't had much time to do anything. Friday I cast 7 pounds of 320 gr. .50 cal. R.E.A.L bullets and about 1 pounds of .490 round ball.
Last edited:
- Joined
- Mar 6, 2022
- Messages
- 172
- Reaction score
- 201
I went and shot with mountian men of the Wasatch for first time. They had competition i came in dead last. It was informal affair I had great time. I dry balled one. Miss placed my ball puller so got to order a new one. My first time shooting with a group. Weather was perfect. Hope to go shooting with them again to learn even more.
Attachments
Last edited:
You probably already do this, but I carry a little plastic bottle with a screw lid filled with cut T-shirt wet patches of dawn liquid dish soap and water.
For sure, I was in a rush to get over to the property when I realized that gun season starts next weekend and left my cleaning stuff on the shelf
longcruise
70 Cal.
Well, I'm not inclined to hammer anybody cause I usually hit myself on the thumb.
Do note however that when you do successfully separate the two the WW is not pure lead and is harder than lead. Another peculiarity of WW castings in that they will be around 8 BHN out of the mold but will harden to around 12 BHN over the next two weeks at room temperature.
So, today, I sharpened my chisels and moved my barrel inletting project into the basement onto my leather working table. Too dang cold in the garage.
Shot my Frontier .50 caplock this morning. Mostly ringing steel at 50-130 yds but also put a few on paper at 75 yds. All shots off hand. 50 grains T7, .490 ball, .010 patch. Temps in the low 20's, but a great day for making smoke 
