JolleyRoger
32 Cal
On auction at a local site.
Claimed to be a .60 cal, made of "steel". No other info
Any idea what this might be?
Claimed to be a .60 cal, made of "steel". No other info
Any idea what this might be?
Double barrel percussion pistol
- Thread starter JolleyRoger
- Start date
Help Support Muzzleloading Forum:
Looks like a 2x2 with two pipes tape to it.
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,178
- Reaction score
- 4,543
From South America? The number stamped on it would be unusual for a home made muzzleloader, unless it was from somewhere you needed to register it.
- Joined
- Feb 28, 2019
- Messages
- 3,549
- Reaction score
- 4,527
Dear Sam. She;s in South Africa the other side of the big pond not South America .I think its made specifically to confuse such as we, As its pretty awful & in that the makers succeeded admirably ! Regards Rudyard of the' Be unkind to ugly guns society'" inc ( or pencil )
Looks better than the ones I have. They came from Thailand. Person I got them from said they were curios for the wall.
After taking them apart and thoroughly inspected. And literally tried to blow them up. They are fully functional.
Meet Howdy and Swasdi
The engraving is Thai for hello..
Notice the locks are left and right.
After taking them apart and thoroughly inspected. And literally tried to blow them up. They are fully functional.
Meet Howdy and Swasdi
The engraving is Thai for hello..
Notice the locks are left and right.
Attachments
Actually, yours looks like an early version of the CVA Tower Pistol. I bought one that looked just like it in 1974, it was packaged as a CVA kit and built it according to the instructions supplied with it. Mine had the flash hole drilled but the breech does look like the breech plug is a permanent part of the barrel, not connected to the tang. Maybe screwed in and the outer part cut off? Only markings were SPAIN and a serial number. I still have it today and occasionally take it out and shoot it. The lock does throw great sparks but needs a small flint. Got another Tower Pistol in a trade a few years later but it had the smaller lock CVA used on everything else they sold. Didn't spark as well so it went on down the road.
I screwed mine in and cut it off. The tang is part of the barrel.
Similar threads
