• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Recommended revolver parts to upgrade or have as spares?

the hawken shop
Shop deals on ebay
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Parts are not that expensive. You have gotten plenty of good recommendations on what to get and where to get them. They are not always available so I'd say get whatever you can when you can. They will only go up in price and possibly down in availability in the future.
 
I appreciate everyone being so helpful with my query. Many thanks.

If I may ask.. Does anyone know if the internal linkage parts (hand &spring, bolt, trigger spring etc..) for Uberti Army .44 are the same size as a Navy .36?

I suspect they are the same as it would be inefficient from a machining perspective to have different sizes, but I have occasionally been incorrect in my life.
 
Widows Son said:
I appreciate everyone being so helpful with my query. Many thanks.

If I may ask.. Does anyone know if the internal linkage parts (hand &spring, bolt, trigger spring etc..) for Uberti Army .44 are the same size as a Navy .36?

I suspect they are the same as it would be inefficient from a machining perspective to have different sizes, but I have occasionally been incorrect in my life.
Click to expand...

I think everything but the actual triggers are the same. Different length between army and navy.
 
Whatever parts you decide to obtain, I'd suggest also getting a copy of Kuhnhausen's The Colt Single Action Revolvers: A Shop Manual. That way you'll have a good reference and guide to fitting the parts.
 
Widows Son said:
I appreciate everyone being so helpful with my query. Many thanks.

If I may ask.. Does anyone know if the internal linkage parts (hand &spring, bolt, trigger spring etc..) for Uberti Army .44 are the same size as a Navy .36?

I suspect they are the same as it would be inefficient from a machining perspective to have different sizes, but I have occasionally been incorrect in my life.
Click to expand...

Go to the VTI website and compare part numbers between the 1851 model and the 1860 model. It's been awhile since I've checked Taylors or Cimarron's sites, but believe they also show that aspect. I've called all three sites in the past, all very helpful employee's. You'll be surprised at the number of parts that carry the same part number between the two models. The 1860 is basically an improved 1851 with different barrel, rammer, grip frame, and cylinder (toss in the frame cutout for the rebated cylinder of the 44 caliber 1860). An exception can be made for the Pietta 1851 Navy model chambered in 44 caliber, it sports the 1860 model style frame for the rebated 44 caliber cylinder, have that revolver and like it as well as my 1860 Army, even better than my regular 1851/1862 frame Navy 36 caliber models.
 

Similar threads

deerstalkert
picked up some revolvers
Replies
13
Views
706
deerstalkert
deerstalkert
Splitear
  • Locked
SOLD Remington Revolver Parts
Replies
3
Views
239
Jappo
Jappo
B
58 Remington and Nipple fouling
Replies
18
Views
1K
No second place
No second place
BPNOOB
Help with new 1851
2
Replies
39
Views
2K
Smokerr
S
Clukmyrooster
Uberti 1862 Pocket Police
Replies
9
Views
834
Clukmyrooster
Clukmyrooster

Latest posts

Back
Top