• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Looking for info

the hawken shop
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
buckleymarka56

buckleymarka56

40 Cal
Joined
May 31, 2022
Messages
143
Reaction score
131
Ok fellow shooters what did I buy? see pics.
It's says Navy Arms , Ridgefield NJ.
BP only 36cal.
See markings,
It's not a peitra, checked with them.
I know the AA means it was made in 1975.
This gun has Never been fired.
When I got it you could pull the hammer back in the cylinder would barely rotate, I took it apart it still had the manufactured grease on the cylinder shaft, scubbed it all off with a wire brush, oiled it and now it's been freely just like it should..paid 75 for it.
Thanks for the help
Mark
 

Attachments

  • 20241113_141337.jpg
    20241113_141337.jpg
    1.9 MB
  • 20241113_141223.jpg
    20241113_141223.jpg
    1.2 MB
  • 20241113_141213.jpg
    20241113_141213.jpg
    1 MB
  • 20241113_200822.jpg
    20241113_200822.jpg
    597 KB
That's the Replica Arms logo. They were an importer of Armi San Marco, Uberti and Pietta. Navy Arms bought them out.
The round barrel, smooth cylinder (no engraving) brass frame and 36 caliber makes it a Griswold and Gunnison.
Might be something under the frame/barrel where the serial number is. Sometimes they just used a logo.
Nice find by the way.
 
I bought that same type imported by Navy Arms in the early 70s and it cost $60 new. Shot it till it got loose in a few years.
 
Last edited:
Jappo said:
That's the Replica Arms logo. They were an importer of Armi San Marco, Uberti and Pietta. Navy Arms bought them out.
The round barrel, smooth cylinder (no engraving) brass frame and 36 caliber makes it a Griswold and Gunnison.
Might be something under the frame/barrel where the serial number is. Sometimes they just used a logo.
Nice find by the way.
Click to expand...
Yes for being never fired, and 75 bucks,couldn't pass it up. Lol
Do you know these stamps?
 

Attachments

  • 20241113_152328.jpg
    20241113_152328.jpg
    765.4 KB
  • 20241113_141213.jpg
    20241113_141213.jpg
    1 MB
  • 20241113_141223.jpg
    20241113_141223.jpg
    1.2 MB
  • 20241113_200822.jpg
    20241113_200822.jpg
    597 KB
Those stamps are proof marks and the AA is the date. Last place you can look is under the loading lever. Otherwise it's just a guess on the maker. My guess is Armi San Marco, they were the most popular.
This is the 1993 Navy Arms ASM logo .
 

Attachments

  • 20241116_090717.jpg
    20241116_090717.jpg
    3.1 MB
I reread your post. You stated Navy Arms, with the RA and being a Navy Arms that's what some call the transition revolver. When Navy Arms bought out Replica Arms. They left the RA logo and stamped the barrel Navy Arms. I've read where these are sought after by collectors, especially if it has the original box.
 

Attachments

  • image0.jpeg
    image0.jpeg
    88.7 KB
Jappo said:
That's the Replica Arms logo. They were an importer of Armi San Marco, Uberti and Pietta. Navy Arms bought them out.
The round barrel, smooth cylinder (no engraving) brass frame and 36 caliber makes it a Griswold and Gunnison.
Might be something under the frame/barrel where the serial number is. Sometimes they just used a logo.
Nice find by the way.
Click to expand...
This was under the loading lever
 

Attachments

  • 20241116_092620.jpg
    20241116_092620.jpg
    793.5 KB
buckleymarka56 said:
This was under the loading lever
Click to expand...
These are all the markings I can see.
According to the *** under the loading lever its a pietta..
The AA means it was made in 1975.
Thanks for your help.
Mark
 

Attachments

  • 20241116_092620.jpg
    20241116_092620.jpg
    793.5 KB
  • 20241113_200832.jpg
    20241113_200832.jpg
    842.9 KB
  • Screenshot_20241117_081328_DuckDuckGo.jpg
    Screenshot_20241117_081328_DuckDuckGo.jpg
    352.8 KB
Replica Arms was an importer (only) and was sold to Navy Arms just before yours was made. Your Pietta is one of the transition pieces imported during the changeover. If I remember correctly the box would have been marked with both NA and RA.
 
hawkeye2 said:
Replica Arms was an importer (only) and was sold to Navy Arms just before yours was made. Your Pietta is one of the transition pieces imported during the changeover. If I remember correctly the box would have been marked with both NA and RA.
Click to expand...
I never say the box. I was sold to me In a leather holster.

Apparently this is a peitta stamp.
At least what I've read. *** was their stamp. This was under the plunger.
 

Attachments

  • 20241116_092620.jpg
    20241116_092620.jpg
    793.5 KB

Similar threads

Dmalikhammer4
Need help finding production date of this LeMat that came to my possession
Replies
11
Views
1K
Dmalikhammer4
Dmalikhammer4
buckleymarka56
Looking for info
2
Replies
24
Views
690
buckleymarka56
buckleymarka56
G
I think I know the model of this cap & ball replica, but not the manufacturer.
Replies
16
Views
728
Jappo
Jappo
LzChase
Civil War era Remington questions from a first time owner
Replies
8
Views
625
45D
4
R
  • Locked
SOLD Miroku 1766 Charleville Musket - NIB
Replies
4
Views
914
wiscoaster
wiscoaster

Latest posts

Back
Top