• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

A "Powder Strength Testing Device"

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 30, 2004
Messages
4,883
Reaction score
7,175
Location
New England
New addition to the 'collection', a power tester, gives a 'relative' powder strength comparison between different brands or batches.


FL-Tester01.jpeg

Use:
  • Put the SAME volume of powder in that vertical 'barrel' and close the cover
  • Fire it and the discharge moves that arm with the lid or cover on it, where that arm rotates UP and around until it runs out of energy and catches on the starred 'ratchet'
  • The more ratchets or further around the ratchet wheel it 'clocks', then the stronger that the powder is
  • Some ratchets have numbers on the points, but they're really meaningless, less a comparative or relative measurement only
  • Example - One lower power lot/batch might register a '3', while say new Goex powder might rate a '5' and then your typically 'hot' Swiss brand powder might be a '6'
 
Neat stuff. My brother gave me an old DGW kit that test powder from many years back. I have yet to put it together and I forgot where I put it!:ghostly:
 
I think you are lucky to be able to find these old relics. Also I have had the same problem with trying to post photos. It beats me how it happens.
 

Latest posts

Back
Top