Hey guys. Got a load stuck in my traditions Kentucky that won't go off. Air compressor won't blow it out and someone ran off with my ball puller and didn't put it back. No store to get one here either. Have to order one. Is there any way to get it out? I removed the liner and everything trying to get this thing to fire but nothing but flashes in the pan.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Stuck loaded
- Thread starter snakeman
- Start date
Help Support Muzzleloading Forum:
Do you have access to a fuse?
Unfortunately no
Phil Coffins
69 Cal.
Straighten out a hair pin and scrape out as much as you can from the removed liner. Then put as much dry powder in and replace the liner. Shoot it out immediately.
I'll see if I can find some like a paperclip or hair pin.
This worked. Problem solved
bldtrailer
Pilgrim
yup but with white lighting liners you must push 4f into the 1/16 hole can take a while (if ball does not exit push more powder through touch hole and RESEAT the ball before firing 2nd time)
Brokennock
Cannon
Can you find a grease fitting to match the threads of the hole the flash hole liner came out of?
I got it to fire with the hair clip and a pipe cleaner. But from now on, I'll do a better job cleaning out the breech.
Grease gun method worked great for me when I had a stuck ball. Extremely messy, but safe and effective. Not appropriate if the touch hole liner can't be removed, and also if not a percussion gun with a removable nipple.
The gun I used it on turned out to have metric threads, so keep that in mind if OP wants to try this method and goes looking for a grease gun fitting.
Oops, continued reading thread and saw problem solved. So .....
But it's good useful advice anyway!
Brokennock
Cannon
For some reason there seems to be people here who are very against this method. If you search around various discussions of it you will find a fantastic video demonstrating its effectiveness and how it isn't really a big deal to clean up after.
I'm sure it works quite well if a grease zerk fits. Probably kinda a pita to clean out but far from impossible considering the convenience of the removal
Tried grease method just to try it, and honestly took no more patches to clean out the grease from bore than it takes clean a dirty bore after range session. Push the majority of the grease out with a tight fitting patch and jag combination, followed with some solvent soaked patches for the remaining grease…. Then a few dry patches….
But I know, you haven’t tried it, so..
Oh! Well you learn something new every day. Thanks for the info!
I have a Kibler SMR. The times I’ve had a ball stuck, I just picked the vent really good, then filled the pan with 4f and thumped the opposite side while at an angle. All the powder disappeared thru the vent hole. Repeated until no more would disappear (about two pans worth), then shot the ball out. That’s worked twice. It isn’t a “100% every time fix,” but it’s the quickest and easiest first method. Don’t give up if it doesn’t work the first time.
Brokennock
Cannon
I hope you never need to find out.
Go get the grease zirk and grease now so you are prepared. If you are ready for it, it won't happen
I hope you never need to find out.
Go get the grease zirk and grease now so you are prepared. If you are ready for it, it won't happen
Fair enough. I work on tractors on the family ranch so I had some around but none that fit that hole.
I am sure the grease gun works, heard a lot about it, never needed it personally.
My thought is: what a mess to clean up out on the range to get back to shooting when 'shooting' it out only requires a swab patch or two and Back in Business!
However; what might be worth pointing out here is - Dry wiping BEFORE loading the first round of the day.
I have seen others run into Flash in the Pan and when we pull the vent liner (ones with one) we find the powder wet, lumpy, even one guy who tried to fire several times before bringing it over, the powder was hardened into a 'Chunk' (cooked solid from his multiple attempts).
Once we picked the fouled (wet) powder out as you described and pushed in clean dry powder - shot it out, wiped it out: Back in Business!
Problem in short; Oil in the breach from cleaning had fouled the charge.
Solution: Always wipe the boare before that first load.
*I see you are in Texas, I assume you use a lot of oil before storage?
(Some say to store firearms upside down...I don't, but humidity is not an issue here and I only use a light coat of oil - BUT I always still Wipe before that first load!)
