One side or two

the hawken shop
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
flatcreek

flatcreek

40 Cal
Joined
Jul 3, 2023
Messages
450
Reaction score
820
Location
People's Republic of NJ
When your lubing a patch with a grease type lube such as mink oil or bore butter.
Do you lube just the bore side of the patch or both. I've tried both ways and a have not noticed a difference.
 
I only grease one side (the side that goes down the bore into the rifling). I like to keep the (dry side) on the ball. I believe the patch better grips the ball if it is un-lubed, but as stated in the previous comment by French Colonial, the grease will squeeze thru the patch to the ball.
 
I use #40 pocket drill for patching material and even though I swipe only one side of the patch in TOTW Mink Oil it wicks through the material giving total saturation.
 
I punch out 100 or so patches. I then toss them like potato chips into my melted bear fat/ beeswax concoction then scoop them out with the wife's strainer spoon thingy. with a popsicle stick I separate the them on a paper plate. when they cool off and the lube solidifies, they really are like potato chips.
I try to make the patches the same diameter as the barrel and when i put them over the bore i press a pocket into the bore making a good seat for the ball.
th.jpg
 

Similar threads

B
What the heck, rust?
2
Replies
25
Views
1K
morehops52
M
Flint62Smoothie
Hunting - Need your clean/cold bore 1st shot to hit w/ the rest of the shots?
2
Replies
20
Views
1K
kelvinator
kelvinator
Thunder Bay
Loading block question
Replies
7
Views
519
stubshaft
stubshaft
R
Patching over your powder charge …. then patching your ball
2 3
Replies
40
Views
2K
Mad Irish Jack
Mad Irish Jack
D
Wondering about the wads...
Replies
6
Views
512
longcruise
longcruise

Latest posts

Back
Top