Resurrecting an original English rifle. Nipple frozen Patent breach clogged. Help!

shop deals on amazon
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
LawrenceA

LawrenceA

50 Cal.
MLF Supporter
Joined
Mar 12, 2020
Messages
1,208
Reaction score
1,367
Location
New South Wales , Australia
Hi Guys
I have a circa 1840's-50's Blanch 69 cal backlock percussion rifle I would like to get going if possible.
The barrel is/was full of crud. I cannot budge the nipple and the patent breach is blocked.
I have tried heat and oil as well as good vigorous tapping.
Any advice on clearing the obstruction and/or loosening the nipple?
Thanks in advance
 
There are times when drilling them out is the only way. If you don't have a drill press don't try it by hand.
Use a bit just slightly smaller than the thread size, and pick the remaining threads out with a small steel pick. Chase the threads, and you should be good to go.
 
andy52 said:
There are times when drilling them out is the only way. If you don't have a drill press don't try it by hand.
Use a bit just slightly smaller than the thread size, and pick the remaining threads out with a small steel pick. Chase the threads, and you should be good to go.
Click to expand...
Tah mate. Am hoping to avoid that. How do you anneal it without overheating the breach? Actually probably soft enough
 
LawrenceA said:
Tah mate. Am hoping to avoid that. How do you anneal it without overheating the breach? Actually probably soft enough
Click to expand...
A heat gun will not overheat the breech, stay away from propane, Mapp etc.

Use a good penetrating oil, heat the breech, put a nipple wrench on the nipple and tap it a few times with a small hammer, let cool with penetrating oil on the nipple. Stick it in the freezer for a few hours, repeat all of the above.

The expansion and contraction at different rates will eventually loosen the threads.

Get a high-quality socket and modify it to fit the nipple and use a ratchet to turn.

These work well
https://www.acmetools.com/craftsman-impact-tool-set-cmmt14104/S0000000081286.html?msclkid=1d16df7f33711812a8cab83ef5e65352&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping-National-Search Only-Profit Margin Target-33-35&utm_term=4581527534201723&utm_content=Profit Margin 33% - 35%
 
Last edited:
French Colonial said:
A heat gun will not overheat the breech, stay away from propane, Mapp etc.

Use a good penetrating oil, heat the breech, put a nipple wrench on the nipple and tap it a few time with a small hammer, let cool with penetrating oil on the nipple. Stick it in the freezer for a few hours, repeat all of the above.

The expansion and contraction at different rates will eventually loosen the threads.

Get a high-quality socket and modify it to fit the nipple and use a ratchet to turn.

These work well
https://www.acmetools.com/craftsman-impact-tool-set-cmmt14104/S0000000081286.html?msclkid=1d16df7f33711812a8cab83ef5e65352&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping-National-Search Only-Profit Margin Target-33-35&utm_term=4581527534201723&utm_content=Profit Margin 33% - 35%
Click to expand...
I have one of those tools if the nipple is really rust welded they don't have enough impact strength.
The cold method does work sometimes I keep a can of liquid nitrogen for that.
 
Your best tool is patience! I wouldn’t heat the breech , you never know who put what down there, could be a bunch of nitro powder . Soak in kroil or homemade penetrant oil , 50 /50 acetone and transmission fluid, you could probably use a heat gun on it , but I wouldn’t use a propane torch. I’ve had horrible looking barrels that the plugs came out easily, I’ve had new looking barrels that the plugs were almost impossible to remove. Heat , soak, maybe put in a freezer, may take months but it will come out.
 

Similar threads

S
Unplugging patent breech? Loaded rifle…
2 3
Replies
42
Views
3K
hunter thompson
hunter thompson
Bob Smalser
Rehabilitating a 200-year-old Jaeger Rifle
2 3
Replies
43
Views
6K
Rifleman1776
Rifleman1776
M
  • Locked
Glossary of Muzzleloading Terms
Replies
0
Views
4K
musketman
M

Latest posts

Back
Top