My Hawken 50 caliber won’t fire anymore . It wouldn’t shoot when I first got it and then I cleaned it up real good and finally got it to fire . I shot it five or six times and then cleaned it . Now it won’t fire again . What should I try ? Thanks for any help I can get.
Newcomer more questions
- Thread starter that1hand
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 23, 2021
- Messages
- 2,900
- Reaction score
- 6,185
Did you store the rifle muzzle down to make sure oil did not pool in the fire channel?
Did you pop a couple of caps before loading to clear the fire channel?
Did you blow air through the fire channel to be sure it was clear?
Did you do anything to insure the fire channel was clear?
Did you pop a couple of caps before loading to clear the fire channel?
Did you blow air through the fire channel to be sure it was clear?
Did you do anything to insure the fire channel was clear?
Jim in Wisconsin
40 Cal
- Joined
- Jun 9, 2021
- Messages
- 313
- Reaction score
- 410
If the cap pops the problem is somewhere in the path leading to the powder. If the cap don't pop, the hammer isn't hitting it right.
A more detailed description of the problem would help.
A more detailed description of the problem would help.
Mad Professor
50 Cal.
- Joined
- Aug 20, 2005
- Messages
- 1,507
- Reaction score
- 200
What model "hawken" and how did you clean it?
What are you shooting? caps and powder
What are you shooting? caps and powder
