Spiller and Burr cylinder

shop deals on amazon
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jappo

Jappo

Poco Loco
MLF Supporter
Joined
Oct 24, 2022
Messages
1,524
Reaction score
1,353
Location
Texas
I’m looking for a decent used Pietta Spiller and Burr cylinder. Found one new @ Taylor’s $84.82, Dixie $85.25 pretty sure plus shipping and tax. Probably have to put them in my basket to find the total cost.
The cylinder that came with it is too short. Actually looks like it's been machined. The ratchet is also way different. The hand barely touches it.
Can't find a date code on it so I have no idea of the age.

TIA
 

Attachments

  • 20241213_114446.jpg
    20241213_114446.jpg
    1.7 MB
  • 20241213_114350.jpg
    20241213_114350.jpg
    1.7 MB
  • 20241213_113905.jpg
    20241213_113905.jpg
    2.1 MB
  • 20241213_113724.jpg
    20241213_113724.jpg
    2.4 MB
  • 20241213_113717.jpg
    20241213_113717.jpg
    2.2 MB
  • 20241213_113712.jpg
    20241213_113712.jpg
    2.3 MB
Last edited:
Well it is a Pietta and an older one at that as it has their old style logo. I have no idea what that cylinder is, never seen one like it before. Quite likely you'll have to buy a new cylinder, loose S&B aren't too easy to find. If it locks up aligned with the bore you can shoot that one but you'll have a lot of side blast (I've shot far worse than that)
 
hawkeye2 said:
Well it is a Pietta and an older one at that as it has their old style logo. I have no idea what that cylinder is, never seen one like it before. Quite likely you'll have to buy a new cylinder, loose S&B aren't too easy to find. If it locks up aligned with the bore you can shoot that one but you'll have a lot of side blast (I've shot far worse than that)
Click to expand...
I thought about shooting it like that, but I'd have to shim it from the front so the hand will reach the ratchet.
 
About the only other option if you can't find a cylinder for it is to set the barrel back. It may not be worth the effort.
 
Jappo said:
I’m looking for a decent used Pietta Spiller and Burr cylinder. Found one new @ Taylor’s $84.82, Dixie $85.25 pretty sure plus shipping and tax. Probably have to put them in my basket to find the total cost.
The cylinder that came with it is too short. Actually looks like it's been machined. The ratchet is also way different. The hand barely touches it.
Can't find a date code on it so I have no idea of the age.

TIA
Click to expand...
I have a cylinder from a newer S&B. It’s not an unfitted cylinder. It has already been fitted to a frame. If you’re interested just PM.

I don’t have a mic but I could try and measure the length for you to make sure it will fit.

The cylinder you have looks like home machined.
 
Secesh said:
I have a cylinder from a newer S&B. It’s not an unfitted cylinder. It has already been fitted to a frame. If you’re interested just PM.

I don’t have a mic but I could try and measure the length for you to make sure it will fit.

The cylinder you have looks like home machined.
Click to expand...
On this cylinder I have, that was my first impression that it was home machined.
It measures exactly 1-3/4" with a tape measure. The frame is about 1-13/16"
 

Similar threads

M
Spiller and Burr
2
Replies
32
Views
2K
Secesh
Secesh
Jappo
  • Locked
SOLD Spiller and Burr Navy Arms Pietta
Replies
4
Views
368
GreyGus
G
Cornbread
Spiller and Burr Cylinders?
Replies
8
Views
913
Long Johns Wolf
L
ZUG
Spiller & Burr Forcing Cone Cutting
Replies
3
Views
665
Smokerr
S
N
Midway deal.
Replies
2
Views
795
RiverRat
RiverRat

Latest posts

Back
Top