ronaldrothb49
45 Cal.
- Joined
- Oct 31, 2021
- Messages
- 853
- Reaction score
- 1,462
I have decided my next project will be giving a new life to this CVA Kentucky pistol kit. Another one I probably picked up at a blanket shoot many years ago. The lock will be disassembled and polished good, it has the adjustable tumbler so that is a plus and it sparks OK. There is a gap between the lock and the barrel and the bar on the sear is hitting wood plus some gaps on the lock inlet that will need some new wood. The touch hole is drilled at an angle through the excessively long breech plug out the face giving a much too long touch hole. Luckily it has a breech plug can be removed. It is over 3/4" long so I will cut it back to 1/2" which will allow me to put the touch hole in front of the breech. Someone wrapped a piece of brass and soldered it over the trigger bar. This prevents the lock from being cocked. Don't know how I'm going to fix that yet. Going to strip the finish and get rid of the excess wood. Will probably do a faux stripe on it since it is the last piece of plain wood that I have in stock. So far I have only had to add the lock screws, I know I had the original but can't find them. Going to see if I can complete this project without putting any more money into it.
