Search results

Most likely just running the sear into the set trigger that's sticking up. Very common problem. Sometimes it's a bigger problem when you screw down the tang screw tight and it pulls the trigger assembly up even further. I'd not mod the trigger, especially of its a 1981. That's a super early...

Post pictures of your lock and triggers

Tc triggers do not interchange with a cva

Original jb weld. 6 to 12hr set up.

Does anyone actually torque down their tang screw? I did some measurements with my torque wrench and it ended up taking 25 inch lbs " roughly 2ft lbs " A loose tang screw can really hurt accuracy, so tightening it down consistently certainly could not hurt. My tang, barrel and trigger are...

To heck with the Olympics.

Packing like a dan'gum pilgrim!

Probably the trigger spring that's worn out and or the triggers are out of adjustment.

Yes they installed that screw after the cut to hold the drum in place.

Let me see the lock panels. Some of the early models, it was the first 2 digits. Later, the last 2.

They offer both.

Unfollowing thread 😂

😆🤣🤣 this is a riot! Arguing over junk... literally.

Luckily for me, this barrel is absolute trash! Found a pulled ramrod end in a barrel yesterday. Never messed with the gun because the bore was in such terrible shape. Oh the things you find!

I have a couple hundred of those!

Traditional will be the last on their to do list.

Line dry

Absolutely!

12 to 18 yards depending what lube I use.