Search results

The next step in shooting conicals is paper cartridges. Roll your own try it. Dave

I have a brass frame Remmy that got loose. I silver soldered a piece of Steel shim stock on the back inside of the frame, That took all the slop out of it. It's easy to do on a Remmy. Dave

If you are looking for the "Tombstone" type, meaning the simple small metal one, that you drift side to side for windage,,,,,,, They can be made very easy with a piece of "bar stock", or upside down "T" bar. Just file the piece to make it fit your dovetail, make it 3/8th in tall, and file a "V"...

I use Min-Wax Spar Urethane, in the green spay can. You can get it in clear gloss, clear semi gloss, and satin gloss. Any of these will give a good looking protective coat. I use BC stock filler/sealer as my starting base coat sealer. After that I do one coat a day with the Spar Urethane, rubbed...

I havn't used Probed 2000, but I have used Acra-glass to glass bed some BBLs. It works really good, and is very strong, and lubricant resistant. Oil, and cleaners don't touch it. I would think if PRO-BED 2000 is fiberglass that it would be a good BBL base. Dave

Those are decent kits. You can make a nice carbine out of that. I built one a few years ago. I added sling swivels and a sling to it. Dave

Yah Buf Havnt seen any here since Sept 27th or 28th. All of a sudden, they will be gone. We will have to wait till next Spring now. On a plus side,, all the hummer feeders are on clearance at Menards, and Wally World. I bought a couple yesterday to replace some faded ones. Dave

I use a cheap Ladies bright red tube of lipstick, from Walmart. If I dont use lipstick, I use Jerows Inleters black. Also as mentioned a black felt tip magic marker will work also. Dave

Craig Wilcox Yes I get great care also, at the VA, from 12 yrs in Navy (1960-1972) No Hummers anymore. It got down to 38* last night, Its coming. Dave

Haven't seen any now in 4 days. I guess they are gone now. I'll leave the feeders out for a few more days, for any stragglers. That means winter is really coming. Darn, I hate winter. Dave

I still have a couple Hummers at my feeders here in S E Wisconsin. I think they will be gone in a day or two. Dave

LME Where are you at,??. Dave

Eezox is good......... I use it on my unmentionables, No complaints. Dave

I like Ballistol. Been using it for years. Dave

Josh You will get along fine with the Bess Carbine. As mentioned they are .750 cal. Tack of the Wolff has 11 gage supplies. Where did you here/see that the Pedersoli Indian Trade musket is dicontinued ???. Dave

I find it much easier to dip my conicals, rather than letting them sit in the lube till its hard. I just dip them and set them on a sheet of wax paper. Dave

Thats it. Dave

Few years ago I bought a small flat horn. I think it was from Crazy Crow. Well yesterday I was looking it over, and found, that it was solid all the way thru. I couldn't even drill it to get access to the interior. I guess you can make them to flat, LOL. Dave

Cut a few lemons, tomatoes, and potatoes, and onions with it, and don't clean it right away. it will darken up real quick. Its not a stainless blade, so it will darken. Dave

Yah, I think ours will be gone within the next week or two.. I'm in S.E. Wisconsin, and they are still showing up at our feeders. SIGH!!!!!! Dave