WITHDRAWN 1 inch rifle barrel 50 cal or larger

[JQuigley]

Hello,

I’m building a hawken and need a barrel for it. I want something at least 36 inches long and something north of a 50 cal but don’t want to shell out the money for a rice or pay all the gunsmithing charges at TOTW to get the dovetails milled, breech plug installed and the barrel staple soldered. Stock is inlet for a 1 inch. Thank you

 

[steg49]

I've got a Douglas XX 54 cal. 11/8 tapered to 1 inch 42 inches long, breech plug with long tang and flint lock vent installed for a right-handed shooter nothing else done. You can learn to do the dovetails for sights and barrel keys, I do all mine by hand. This would make a nice full stock Hawken! $275 plus shipping. Photos are available if interested. steg49

 

[JQuigley]

I've got a Douglas XX 54 cal. 11/8 tapered to 1 inch 42 inches long, breech plug with long tang and flint lock vent installed for a right-handed shooter nothing else done. You can learn to do the dovetails for sights and barrel keys, I do all mine by hand. This would make a nice full stock Hawken! $275 plus shipping. Photos are available if interested. steg49

Id really like that but my stocks inlet for a 1 inch and I don’t think I’ll be able to shave enough for a 1 1/8. Thank you though