Cajun72
Grapeshot
Looking for a .290 round ball mold. Was going to get #2 1/2 from BPI but out of stock.
Thanks
Thanks
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
WANTED .290 round ball mold
- Thread starter Cajun72
- Start date
Help Support Muzzleloading Forum:
Mark Herman
50 Cal.
- Joined
- May 22, 2019
- Messages
- 1,060
- Reaction score
- 546
Lee makes a .285 RB mold
I've found one on eBay :
https://www.ebay.de/itm/Martys-Arms...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649
Has no sprue cutter and can't be used as it comes , since there are no vents to the cavitys cut , therefore don't fill with lead . But with a little triangular needlefile i could solve the problem .
Sprue has to be cut off with a pair of scissors , RB themselves come out pretty nice now .
You can roll them between two heavy metal plates or use a tool like I've made ( have a look at my thread " goodies I like to own ") to get them perfectly round .
Only thing is , I've ordered and payed on March 7 , sent out on March 19 (sic!) and finally got it today , May , 7 ! So You should be VERY patient .
https://www.ebay.de/itm/Martys-Arms...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649
Has no sprue cutter and can't be used as it comes , since there are no vents to the cavitys cut , therefore don't fill with lead . But with a little triangular needlefile i could solve the problem .
Sprue has to be cut off with a pair of scissors , RB themselves come out pretty nice now .
You can roll them between two heavy metal plates or use a tool like I've made ( have a look at my thread " goodies I like to own ") to get them perfectly round .
Only thing is , I've ordered and payed on March 7 , sent out on March 19 (sic!) and finally got it today , May , 7 ! So You should be VERY patient .
Similar threads
