Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Ballistic Products;
http://www.ballisticproducts.com/Lead-Buckshot/products/65/
#3 buck (.250) is in stock,, but it's alloyed Lead
"Hardened", But I can mark the stuff I have by pressing a thumbnail to it.
I don't know the percentage of the alloy but this is some good buckshot!!
Any reason you think you must have pure lead vs. a lead alloy? If the soft lead shot deforms as it's crushing against itself when acceleration is applied, then the sphere's won't be round and will tend to fly in an erractic path.
If it loads OK it will shoot OK alloy is not that important.
Harder lead my require a slightly thinner patch in some rifles and rifles with wide lands tend to load hard.
Dan
Up here we get mostly Hornady Buckshot. It isn't "pure" lead, it does have some hardener, but it shoots and works well. Patterns are consistent.
From the Hornady site #4 Buck .240.
Made with the same dedication to uniformity as Hornady bullets, Hornady Buckshot is cold swaged using a lead alloy hardened with antimony to prevent deformities after firing. This helps it fly straighter and hit harder. We use a strict roundness tolerance of +.001" to put more pellets in your targets. The industry standard is a +.006" tolerance.