• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

.34 PERCUSSION FIRST SHOTS

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 30, 2021
Messages
167
Reaction score
354
Hello all,

I bought this .34 caliber percussion rifle from an experienced outdoorsman and muzzleloader in PA a while back. The stock finish was poor and not original, so I did not hesitate to refinish it. Stripping the almost paint like crud and refinishing exposed the beautiful walnut grain. I rubbed the Tru-Oil back and kept it thin to eliminate any buildup and gloss. I know that Tru-Oil is not in everyone's vocabulary but in my opinion it worked here.

I scoped the bore and concluded that it was toast but it unbreeched easily and I was able to clean the bore and rifling to very good condition. Lesson learned; a high-quality borescope can give an exaggerated view of bore condition.

It took a while to get to the woods for a test firing, several months in fact. Since my only previous experience with muzzleloading is my .50 Renegade I was surprised by the complete lack of recoil and almost no muzzle report from this small-bore rifle. At the first shot I thought only the cap went off with no main charge ignition.

The rifle did function though, and the target picture below is the first three shots at around 25 yards. The large group is probably due to my aging eyes and the poor balance of the rifle. I will get used to that and am hoping for squirrel hunting accuracy, time will tell.

It's a very simple rifle and nothing to get excited about but I did. I intend to keep it going for a while shooting only light loads to respect it 150 or so year history. To the PA gentleman that sold it to me, thank you for getting me re-started in muzzleloading and I still owe you those Virginia peanuts.

Jeff
Squirrel Rifle (1).jpeg
IMG_0121.jpg
 
Very nice, I really like the looks of that rifle. The work you did to it looks great. I think the squirrels in your area are going to be in trouble based on your target. Well done. 👍
 
Beautiful ! !

It's nice to see a nimble rifle sans patch box

What size RB's are you using in that .34 ?

(.32 RB with multiple or thick patches ? )
 
Beautiful ! !

It's nice to see a nimble rifle sans patch box

What size RB's are you using in that .34 ?

(.32 RB with multiple or thick patches ? )
She's a very plain rifle, no patch box, no cheek piece on the stock.

Track of the Wolf had a good selection of small diameter roundball that loaded okay with .018'' patches. Unfortunately my first selection was off and I had to purchase twice. This barrell may have been built supplied with a ball mold but it didn't make it to me.
 
My .36 rifle likes a .350" ball patched with .024" canvas. A .34 should be right between a .32 and a .36 in ball size or a bit closer to the .32. I like that rifle! That's what I call a very fine looking rifle.
 
My .36 rifle likes a .350" ball patched with .024" canvas. A .34 should be right between a .32 and a .36 in ball size or a bit closer. to the .32. I like that rifle! That's what I call a very fine looking rifle.
Thank you sir. I could have bought something modern like a .32 Crockett but this rifle appealed to me.
 
Looks quite lovely. Wish my little Seneca would shoot well with light charges,I've quite enjoyed how quiet they are when I've tried them
 

Latest posts

Back
Top