• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN .36 southern rifle for sale

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Aug 29, 2020
Messages
434
Reaction score
795
For sale is a .36 caliber southern style rifle I just completed.
The specs are 3/4" X 42" getz barrel 1/48" twist .36 caliber
Birdseye maple stock from Knob Mountain
Chambers Late ketland lock...I rounded the tail of the lock
Chambers White Lightnin' touch hole liner drilled out to 1/16"
Davis double set triggers ....can fired set or unset
Iron hardware from various places. Kibler buttplate and rear sight
Rifle weighs 7.3#s and the LOP to the front trigger is 14"
The sights will still need some adjustment. I shot it some and then filed the front sight a bit and haven't shot it since.
005.JPG


The flaws are as follows.
This was my first time pouring a pewter nosecap so one side is kinda ugly, the other side looks good
The stock has some season checks right around the cheekpiece.
I redrilled the triggerguard pin hole up higher on one side only because the pin was right on one of these checks.

The price is $1600 shipped. Payment by Check or Money Order.
I've shipped several longrifles and rifle will be very securely packaged
 

Attachments

  • 007.JPG
    007.JPG
    239.1 KB
  • 006.JPG
    006.JPG
    193.2 KB
  • 003.JPG
    003.JPG
    341.5 KB
  • 010.JPG
    010.JPG
    301.9 KB
  • 012.JPG
    012.JPG
    225.6 KB
  • 014.JPG
    014.JPG
    123 KB
  • 013.JPG
    013.JPG
    142.8 KB
yes....there's about 1/8" cast off. I don't remember how much I decided on and it's kinda hard to measure now that everything's rounded but I'd say 1/8" is right.
 
Could you post some close up pictures of the checks? I can't tell much about that side in the pics you have.
Thanks
 
Thank you for pointing that out. I thought I had a pic of that posted. Here's a pic of the checks and it also shows the extra pin hole for the triggerguard. It could always be filled with a toothpick and stained
 

Attachments

  • 006.JPG
    006.JPG
    245.7 KB
This is a really beautiful rifle, I even like the flaw in the pewter. Just wish it was a different caliber.
 
Thanks for all the compliments on the rifle. I think I'll hold onto this one for awhile. Admin please delete this ad.
Thanks
 
Status
Not open for further replies.
Back
Top