• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD - Pending funds 45cal barrel, breech, and full length maple stock - for build

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Shotgun232

36 Cal.
Joined
Sep 12, 2013
Messages
140
Reaction score
45
For sale is a 45cal barrel, breech plug with tang and a partially finished full length maple stock.
The barrel is 45cal, 1-66 twist, measuring 15/16 across the flats, and 42.5 inches in length. Unknown maker - guy I bought it from said it was from Track of the Wolf, can’t confirm, no marks, bore is brand new and outside of barrel has some patina from sitting around.

The stock is some very curly maple and is fully inlets for the barrel and partially I petted for the breech. The ramrod hole is drilled. Overall length on the stock is 60 inches and length of breech to top of butt pad is 16 inches.

Purchased with more ambition and free time than I have now. Should be a fun project!
Pricing this at a modest $250 plus shipping - send me your zip code and I can get you a price.
Accepting PayPal friends and family, check or money order.
 

Attachments

  • IMG_9122.jpeg
    IMG_9122.jpeg
    3.1 MB
  • IMG_9123.jpeg
    4.5 MB
  • IMG_9124.jpeg
    4.9 MB
  • IMG_9125.jpeg
    5.2 MB
  • IMG_9126.jpeg
    6.2 MB
  • IMG_9127.jpeg
    4.6 MB
  • IMG_9128.jpeg
    1.9 MB
  • IMG_9130.jpeg
    5.4 MB
Last edited:
Nice piece of wood. two questions. How far back is the tang cut into the wood? Also would like to see a picture of the barrel sitting in the barrel channel full length.
 
For sale is a 45cal barrel, breech plug with tang and a partially finished full length maple stock.
The barrel is 45cal, 1-66 twist, measuring 15/16 across the flats, and 42.5 inches in length. Unknown maker - guy I bought it from said it was from Track of the Wolf, can’t confirm, no marks, bore is brand new and outside of barrel has some patina from sitting around.

The stock is some very curly maple and is fully inlets for the barrel and partially I petted for the breech. The ramrod hole is drilled. Overall length on the stock is 60 inches and length of breech to top of butt pad is 16 inches.

Purchased with more ambition and free time than I have now. Should be a fun project!
Pricing this at a modest $250 plus shipping - send me your zip code and I can get you a price.
Accepting PayPal friends and family, check or money order.
If none of these fellers buy I might purchase this
 
Back
Top