A tip from a tight old timer!

[bud in pa]

I had a set of Chapman screwdriver bits. They come with a handle, and extension, and a ratchet. the bits are hardened and hollow ground. The ratchet comes in handy when removing stubbren screws.

 

[BJm]

Electrician's screwdriver sets are hollow ground & will fit most "gun screws". The yellow & red handles look out of place in your muzzle loading kit so remove the handles & replace with a piece of antler, problem solved

 

[Doc Ivory]

A piece of an old hacksaw blade is a perfect idea!
Dangm, why didn't my old mind think of that...

 

[toot]

Hey toot thank you! Didn't you know that yellow was period correct?
Flintlocklar

isn't yellow & green both on the historic color list of execptable colors?

 

[Larry (Omaha)]

isn't yellow & green both on the historic color list of execptable colors?

Now you got it!!!!!!
Larry

 

[Kansas Jake]

One good use for a Dremel in gunsmithing is to put a sanding drum about 1/2” in diameter in it and sand down a screw driver bit in a hollow ground shape to fit narrow screw slots tightly.