I previously authored a post for the actual, Family Heirloom, ML 12 gauge shotgun a while ago and just touched on this unique and well designed, over the shoulder, shot pouch. I was torn whether to post this topic in The Craftsman section, but decided to ultimately go with the Shooting Accessories section, since I just refurbished it. I originally received the pieces of the pouch in a small, paper bag with the shotgun. The metal pieces were basically all there except for one scoop that I fabricated from brass sheeting. However, all of the leather was dry rotted and unusable, except as patterns to reproduce the pieces. I am a pretty accomplished leather worker and was able to replace all of the leather, integrate the metal pieces in and assemble a really neatly designed, vintage, shotgun accessory. The bag hangs over the shoulder with the two spouts pointing down. Each spout has a small, spring loaded, door inside so when you remove the brass scoop, no other shot will drop on the ground. Inserting the scoop again opens the door, dispenses shot into scoop and when scoop is removed, door springs shut. There are two separate sections, in the bag, for different sized shot I presume. The entire scoop assembly, from the desired section, unscrews from its brass collet that is sewn and screwed into the leather. This removal gives you a nice, big. opening to refill the shot into either of the sections. Each of the spout assemblies have Pato Dantes 1886 stamped in the metal and the original spout has PAT MARCH 28th 1871 also stamped into the metal. I really love how the pouch is positioned over the right shoulder and the spouts pointing down on the left side which makes for very easy shot dispensing. The original designers of the pouch obviously thoroughly understood the “gravity” of the dispensing situation
FYI. The brass screws and the brass, leather, rivets are modern manufacture, but appropriate parts for the period. Also, since I am really cheap, I do not own a sewing machine for leather, so all stitching is done by hand using a homemade, thonging chisel to punch the holes and to space the stitches.
As always, any comments, advice, suggestions, etc. are welcome.
Regards,
Bob
FYI. The brass screws and the brass, leather, rivets are modern manufacture, but appropriate parts for the period. Also, since I am really cheap, I do not own a sewing machine for leather, so all stitching is done by hand using a homemade, thonging chisel to punch the holes and to space the stitches.
As always, any comments, advice, suggestions, etc. are welcome.
Regards,
Bob