• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Antique 9 gauge percussion double barrel side-by-side English shotgun

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

Joe Weathersby

Pilgrim
Joined
Jun 20, 2023
Messages
1
Reaction score
10
I want to sell by shotgun made by William Smith of London. The barrel is 34.25” long and the overall length of the gun is 50 inches. The barrel is worn but the words SMITH PRINCES ST LONDON LAMINATED STEEL can still be read. The stamp marks on the underside of the barrel indicate that it was proof tested in Birmingham, possibly twice. So, it was likely made in the early to mid-1800’s. Everything is in working order and I fired both barrels once without ammunition. Asking $475 o.b.o..
IMG_3090.jpg
IMG_3073.jpg
IMG_3075.jpg
IMG_3083.jpg
IMG_3090.jpgIMG_3073.jpgIMG_3075.jpgimage0.jpegimage1.jpegimage2.jpegIMG_3080.jpgIMG_3085.jpgimage3.jpegIMG_3083.jpg
image0.jpeg
image1.jpeg
image2.jpeg
IMG_3080.jpg
IMG_3085.jpg
image3.jpeg
 
I retract my “I’ll take it”

Seller first stated bores were in good condition.

Seller sent this pic: 0F0C196E-EF0F-43C1-821F-AD273DB0806A.jpeg

Seller would not answer if these were pits or fouling buildup.

These are laminated barrels.

Buyer beware.
 
Status
Not open for further replies.
Back
Top