• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Antique double barrel percussion shotgun ca 1850s

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 8, 2019
Messages
443
Reaction score
488
Location
Covington, VA
Nice wall hanger as it is with potential to be a good project for shooting. I believe it is 12 gauge but measuring it without a caliper I was right around .75 so it could be 10 gauge, but probably 12. I have no idea why the upper piece between the barrels (I knew the wood until I started writing the post lol) is missing. It has British proofs underneath and scattered pitting. Nipples are somewhat smashed and may need replacing if you wish to use it. Stock is cracked in front of the trigger guard. All considered it's a good looking piece but not top dollar. Has good potential to make it better. I don't have a good light for the bore. I cleaned it some and it looks decent for it's age and will likely clean up more. I might not put a slug behind it with a heavy powder load but I don't see why it couldn't shoot again. Priced accordingly, $100 plus shipping. I accept PayPal, Zelle, Venmo, Cash App and of course a check or money order
 

Attachments

  • PXL_20240216_163537787.jpg
    PXL_20240216_163537787.jpg
    5.3 MB
  • PXL_20240216_163624217.jpg
    PXL_20240216_163624217.jpg
    3.8 MB
  • PXL_20240216_163610269.jpg
    PXL_20240216_163610269.jpg
    4.8 MB
  • PXL_20240216_163554373.jpg
    PXL_20240216_163554373.jpg
    4.7 MB
  • PXL_20240216_163600077.jpg
    PXL_20240216_163600077.jpg
    4.3 MB
  • PXL_20240216_163549987.jpg
    PXL_20240216_163549987.jpg
    5.2 MB
  • PXL_20240216_163645768.jpg
    PXL_20240216_163645768.jpg
    5.7 MB
  • PXL_20240216_163700361.jpg
    PXL_20240216_163700361.jpg
    4.8 MB
  • PXL_20240216_163616485.jpg
    PXL_20240216_163616485.jpg
    4.4 MB
  • PXL_20240216_163654562.jpg
    PXL_20240216_163654562.jpg
    3.6 MB
Nice wall hanger as it is with potential to be a good project for shooting. I believe it is 12 gauge but measuring it without a caliper I was right around .75 so it could be 10 gauge, but probably 12. I have no idea why the upper piece between the barrels (I knew the wood until I started writing the post lol) is missing. It has British proofs underneath and scattered pitting. Nipples are somewhat smashed and may need replacing if you wish to use it. Stock is cracked in front of the trigger guard. All considered it's a good looking piece but not top dollar. Has good potential to make it better. I don't have a good light for the bore. I cleaned it some and it looks decent for it's age and will likely clean up more. I might not put a slug behind it with a heavy powder load but I don't see why it couldn't shoot again. Priced accordingly, $100 plus shipping. I accept PayPal, Zelle, Venmo, Cash App and of course a check or money order
Take a AA battery, drop it down the bore and shine a light on it.
NW
 
I'm sorry I upset y'all with this good deal. I know I could have probably held out for a bit more but I bought this and another gun for $200 including shipping and I really bid on it for the other gun so I was pleased to be able to give someone else a good deal and get back half my money. :)
 
I seen this about a minute after it was listed. I cogitated for about 15 minutes and then I decided, why not.
Well I'm not sure what I bought until I get my hands on it. Even if it's a conversation piece, I've been looking for one. There is one local that the person has been trying to sell for over a year now. The problem with it is he has it mounted on a piece of wood. The barrel and stock have been drilled and have screws holding it from behind the board. He "thinks" the locks work. I have not looked at it in person. At $300 and firm, don't think I want to. So when I saw this one come up, I couldn't resist it.
Now the wait.. .
 
Last edited:
Status
Not open for further replies.
Back
Top