• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Any Suggestions an Inexpensive .36 Squirrel gun?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Protrucker

45 Cal.
Joined
Dec 9, 2004
Messages
614
Reaction score
2
Hi all,
The longer I have hunted with charcoal burners, the more I like it. I've taken deer, turkeys, & one Canadian black bear so far. I have several muzzleloaders, but no small caliber rifles. :what: Anyone have any suggestions for an inexpensive .36 caliber rifle that I could use for squirrels? Cabella's has a .36, but $500 is an awful lot to spend for a squirell gun. :huh:

Thanks
 
If you want it just for small game like squirrel and rabbits, why not go with a .32 cal. If it doesn't have to be a flintlock, the Traditions Crockett .32 cal. is a real good shooting little rifle. Check Midsouth Shooters Supply for a good price on one of them. They are plenty for squirrels and real cheap to shoot.
 
Is the reason you don't like it becasue of the looks, or are you worried about recoil. If it is because of recoil, there is none to speak of with a .32. About like shooting a .22 LR.
 
They are now out of production, but if you can find one you may be happy with a Dixie Tennessee Mountain rifle. They were made in 32 and 50 caliber, both flint and percussion, and both left and right hand versions. I would think that when you find one, it'll be in the range of $300-$400. :m2c:
 
I occasionally come across T.C. Senecas at the gun shows in .36 and .45, price range $200 -250. Picked up a .36 in cherry condition. Sighted it in for squirrel hunting with 20 grains of Goex 3f.
 
Rebel,
It's neither the looks or concern about recoil. I was ready to buy one until I put it up to my shoulder. It just didn't feel comfortable the way it wrapped around my shoulder & I was concerned that it wouldn't shoulder well if I was dressed in enough clothes to stay warm in these NY December to February temperatures.

Bob J,
I've been trying to find either a Seneca or Cherokee in the .36, but haven't had any luck in the past 2-3 years.
Want to sell yours? LOL
 
Ocassionally you will find a good used CVA squirrel rifle or Varmint rifle for sale. They are good shooting little .32 cal. rifles. Smaller than the Crockett, due to a fairly short barrel, but accurate shooters if in good condition.
 
Thanks for the links.
Anyone have any experience with the H&A underhammers? I've looked at them a few places on the net, but haven't actually seen one. What keeps the cap from falling off, with the nipple pointing down?
 
I have a Numrich arms version of the H&A. The cap stays on just fine. It would require quite a bit of pressure to get it off. The trigger mechanisim could not be simpler. The spring for the hammer is the triggerguard. The trigger has a sear that engages the hammer. All REAL simple.

However, I am having a tremendous problem with hangfires. The nipple is right in the path of the soot from the previous loading. However, I have no idea why it is hangfiring at this point.

The guy that runs the site www.underhammers.com is a real nice guy and responds to every e-mail. Try him for any questions you may have.
 
Back
Top