Ok here in NEPA anyway i can't find anything other than the bare basic stuff for my .32 they say no one makes things like speed loaders.so i am setting out to build and test some stuff i will share with all here. so far i have built a fast loading system for .32 maybe everyone has done this already if so sory for the waste of bandwith. Yester I tested my system of fastloading and it works.
Here What You need and what to do
I used free rulers from the locale fairs any wood or plastic about .15" thick will work nicely.
a 21/64th drill
a bunch of .22 lr cases
and a bunch of fired .223 cases
take the ruler cut it in half drill 6 31/64th hole spaced about 1/2" apart on each side sand them if needed for tight fit with a .32 patched ball
pour Premeasured charge into fired .223 case (will hold over 25 gr.fffg cap with .22lr case (mine fit snug) and wax if you want to
to use pull lr case out of .223 case charge gun.
center prelubed patched ball in barrel start with starter and there you go..... it cut my reload time by over half while hunting.
Here What You need and what to do
I used free rulers from the locale fairs any wood or plastic about .15" thick will work nicely.
a 21/64th drill
a bunch of .22 lr cases
and a bunch of fired .223 cases
take the ruler cut it in half drill 6 31/64th hole spaced about 1/2" apart on each side sand them if needed for tight fit with a .32 patched ball
pour Premeasured charge into fired .223 case (will hold over 25 gr.fffg cap with .22lr case (mine fit snug) and wax if you want to
to use pull lr case out of .223 case charge gun.
center prelubed patched ball in barrel start with starter and there you go..... it cut my reload time by over half while hunting.
