barrel pieces!!

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hoochiepapa

75 Cal.
Joined
Oct 25, 2010
Messages
5,853
Reaction score
7
I've come up with some ideas on barrel engraving and inlaying, and would like to get my mitts on some pieces of barrel to practice on.
Anything will do, am willing to pay.
 
Mike
I've got a 6" piece of a T/C barrel sitting here if you're interested


Mitch
 
hey mike i have a short piece about 2 inches i cut off a barrel it is yours if you need it, i will look around for more. if you could use modern barrels i have a stack of them.
 
Mike, I have a 6 1/2" piece I cut off my Pedersoli Frontier. PM me an address and I will mail it to you.
 
I'm interested in anything that is hexagon. I will PT all of you. Thank you very much.
 
sounds like a cool project ... i don't have any barrel pieces, but i'd like to know how it turns out!

send pix ... we love pix!
 
You siad hexagon, It would be a lot easier to buy a piece of hexagon cold rolled steel of whatever size and legth you want.As I heard somewhere , Pedersoli barrels are harder than most others, I personally do not know.
 
Back
Top