• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Blackened Brass

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mrfritz44

32 Cal
Joined
Jan 21, 2024
Messages
45
Reaction score
26
Location
PA
Anyone blacken brass while on the gun? I think I want to blacken this Woodsrunner brass but the thought of screwing up the curly maple is giving me pause.

I've blackened removable Hawkins brass without issue, but any tips for doing it while on the gun?
 
iu
 
Ditto post #2.

Will take longer, and multiple "treatments", but the only way I see you can do it with blackening solution and without possibility of harming the finish is to remove all the parts and blacken them while off the rifle.
 
I have used many different solutions to patina brass and would not use any of them when the parts are in contact with wood. Would not want the solutions to enter the wood grain. I would go the natural route if I didn't want to take the parts off. If you do take them off the solutions work better if the metal is warm.
 
I get great and immediate results with Birchwood Casey bluing liquid. Use tape around brass to protect the wood, remove the brass or just be careful. I just rub it on and that's all; like kyron4 posted.
 
Back
Top