• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Breech plug removal question.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I wouldn't pull it after only 3 years, no need to. I do like to put breech plugs in with high temp anti-seize lube on the threads, there is not a chance of any corrosion after this treatment. I use the same anti-seize on my tractor turnbuckles, after years of use none of it has ever washed off. I also put it on my cars and truck lug nuts for easy removal the next time I have a flat.

I use this;

View attachment 363224
This stuff is dangerous. Putting it on lug nuts and other tight-tolerance applications is a good way to buy yourself some new threaded projects.
 
Please explain.
This stuff has aluminum in it. In very tight threads, that aluminum is essentially gritting/sanding against those threads and causing damage. Eventually, and it doesn't necessarily take very long, the threads become damaged to the point they are no longer tight.

As a side note, it's generally not recommended to put any kind of lubricant on a thread that you don't want to come loose unless you have some other mechanism holding it in place, such as a lock washer, pin, safety wire, etc. Putting this stuff on lug bolts/nuts is just begging for them to back out from vibration...I don't care how tightly you torque them. You'll have people say they've been doing it for years and never had an issue, but normalization of deviance is a dangerous way to live your life.
 
normalization of deviance is a dangerous way to live your life
RDJ.gif


I wake up deviant.

I do prefer the copper anti-seize, though.
 

Latest posts

Back
Top