broken trigger guard om lymams plains pistol

[Dozer2972]

How hard is to find a trigger guard for a lymans plains pisto.It is a 54 cal.

 

[Billnpatti]

If you have all of the parts to your triggerguard, it can be brazed back together. If you don't know how or have the equipment to do the brazing, you can take it to a gunsmith and have him make the repairs. If you don't have a gunsmith near by, almost any welding shop can do the brazing for you but since they are not gunsmiths, you will need to have them do it while you watch to be sure that everything is lined up properly. If you have it done at a welding shop, you will most likely have to do the finish work of filing and working it with emery cloth to make the braze line disappear.

 

[brawny man]

Another option is to contact Lyman directly. They will have the part. Phone # 800-225-9626. Dixon Muzzleloading also has some parts, Their phone # is 610-756-6271.

 

[Dozer2972]

WHY DID I NOT THINK OF YOU ROCK! THANK YOU SO MUCH DOZER2972 FROM THE PACIFIC NORTHWEST.

 

[Dozer2972]

That is definitely. A very good idea.Thank you.

 

[keiths]

The triggerguard in my kit was broken. I called them, and they sent me a new one at no charge. It arrived within the week.