-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Brown Bess mainspring
- Thread starter rdlowe
- Start date
Help Support Muzzleloading Forum:
Thanks, Hawkeye. This appears to be new parts cast from originals? It’s a great place to start looking for something that’ll work for me.
- Joined
- Nov 1, 2018
- Messages
- 3,855
- Reaction score
- 2,888
The Pedersoli Brown Bess Mainspring is a different shape than the originals, the lower leg has a more downward bend. This is because the steel they use in Europe isn’t the same type of spring steel that they cast from in the USA, its a type of spring steel used on musical instrumentS.
Any casted spring used in a Pedersoli gun will need to be fitted to the lock and lock mortise in the stock.
Jim Caso in VT will make a very good replacment Spring out of 1070 / 1095 stock. A forged spring will last much longer too.
Any casted spring used in a Pedersoli gun will need to be fitted to the lock and lock mortise in the stock.
Jim Caso in VT will make a very good replacment Spring out of 1070 / 1095 stock. A forged spring will last much longer too.
- Joined
- Nov 1, 2018
- Messages
- 3,855
- Reaction score
- 2,888
Jim is in Vermont.
Track of the Wolf has a nice Pedersoli replacement mainspring for only 19$.
Making a spring from 1075 or 1095 stock isn’t the most complicated thing in the world, making it look pretty is the hard part. Getting the bevels right and the foot to have the right arch. I’ve made some springs that work, just not pretty.
The Dixie Gun Works springs are ok, the come tempered and usually require minor fitting.
