What size caps for a Uberti 1851?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
caps?
- Thread starter Old Timer 48
- Start date
Help Support Muzzleloading Forum:
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,222
- Location
- Louisiana & My camp in Mississippi
Do you have factory nipples or aftermarket?
Can’t go wrong with Remington 10s imho. They work well on all my revolvers.
Work well in all of mine from Walker/Dragoons-Uberti-Pietta Army/Navy frames-1858 Remington's-Ruger Old Army. Rem and CCI #11's work fairly well, don't have as long as of a skirt as Rem 10's (they really hug the side of the nipples-very tight fit on either factory or aftermarket nipples). Stay away from CCI #10's. Narrowest inside diameter of all nipples and very short skirt. They won't fully seat on any of my cappers with either factory or aftermarket nipples. RWS1075's work well too, but take a back seat IMO to Rem 10's.
