CCI #10 Caps

[TarponStalker]

A few months ago my son bought some #10 CCI caps for me in Texas. He knew I needed 10s but he didn't know CCI caps were different from Remington #10s. I was thankful he was able to find caps of any size but once I got home with them I found they won't work very well in my Pietta 1851 Navy. Even after I put Slixshot nipples on it. I can possibly force them on my ROA but I don't like having to push them on so hard.
I also have a Navy Arms shotgun. Won't work on that either.
My question is what will CCI #10 caps work on? I only have 3 tins but I wonder if I can buy a set of nipples for my revolvers that these caps will work on. I hate for them to just sit not being used since caps are scarce.

It's funny how much size difference between Remington and CCI #10. My guns love Remingtons.
Thanks.

 

[rusticbob]

I have a bunch of #10 CCI caps left over from cap n ball days, they seem to fit fine on my T/C caplocks. Must be multiple sizes of nipples out there.

 

[TarponStalker]

I have a bunch of #10 CCI caps left over from cap n ball days, they seem to fit fine on my T/C caplocks. Must be multiple sizes of nipples out there.

Yes. There are several sizes of threads and nipples. Some vary by just .0001 inch. I didn't know they would fit on TC rifles. Maybe my son or my friend can try them.
They will fit tightly on my guns. Even on a half stock rifle I built years ago but they're so tight that they don't go all the way down. That can cause light strikes and the need to cock and fire again. The first hammer drop only seats the cap.

 

[TarponStalker]

It appears that I'll get to answer my own question. I recently purchased a Pietta 1860 Colt. I figured what the heck it's worth a try so I took out a tin of CCI 10s

The #10 CCI caps fit and worked perfectly in it. The CCI #11 that work on my other guns are very loose on the nipples. Actually falling off before I could fire. I know I can pinch them but I don't wanna be bothered with that unless
necessary.
I'll probably use up these caps then replace the nipples with Slixshot since #11 CCI caps are at least somewhat available and they work with Slixshot nipples.
Just thought I would update.

 

[Flint-or-Cap]

It appears that I'll get to answer my own question. I recently purchased a Pietta 1860 Colt. I figured what the heck it's worth a try so I took out a tin of CCI 10s

The #10 CCI caps fit and worked perfectly in it. The CCI #11 that work on my other guns are very loose on the nipples. Actually falling off before I could fire. I know I can pinch them but I don't wanna be bothered with that unless
necessary.
I'll probably use up these caps then replace the nipples with Slixshot since #11 CCI caps are at least somewhat available and they work with Slixshot nipples.
Just thought I would update.

Perfect, thanks for this info! Recently bought 2 used b/c pistols and some various supplies. I've only shot the the 1860 Colt (Pietta) so far, but found the CC #11 that came in the box blow right off the nipples - even infringing on the cylinder rotation at times. Fears of chain fires has me only loading 1 chamber at a time. I had read here about Rem and CCI #10 being different - wasn't sure which would be better. I'll try to get a tin or two of the CCI #10 and give them a try. Thanks again!

 

[AlexB]

Perfect, thanks for this info! Recently bought 2 used b/c pistols and some various supplies. I've only shot the the 1860 Colt (Pietta) so far, but found the CC #11 that came in the box blow right off the nipples - even infringing on the cylinder rotation at times. Fears of chain fires has me only loading 1 chamber at a time. I had read here about Rem and CCI #10 being different - wasn't sure which would be better. I'll try to get a tin or two of the CCI #10 and give them a try. Thanks again!

https://www.trackofthewolf.com/Search.aspx?search=Nipples
They make what you want and work excellent.

 

[springfield art]

A few months ago my son bought some #10 CCI caps for me in Texas. He knew I needed 10s but he didn't know CCI caps were different from Remington #10s. I was thankful he was able to find caps of any size but once I got home with them I found they won't work very well in my Pietta 1851 Navy. Even after I put Slixshot nipples on it. I can possibly force them on my ROA but I don't like having to push them on so hard.
I also have a Navy Arms shotgun. Won't work on that either.
My question is what will CCI #10 caps work on? I only have 3 tins but I wonder if I can buy a set of nipples for my revolvers that these caps will work on. I hate for them to just sit not being used since caps are scarce.

It's funny how much size difference between Remington and CCI #10. My guns love Remingtons.
Thanks.

All the more reason to stick to Flint! (Or, un-mentionables!)

 

[stubshaft]

It is surprising that the #10's do not fit the slixshot nipples. I have them on my Pietta 1858 and the CCI #10's fit perfectly.