Cruisie lamp

[PitchyPine]

Made this lamp today, it`s called a Cruisie lamp.

 

[RC]

holy smokes pitchy! thats neat! and fast! nice lookin! where'd that idea come from??? great job ya dun extry good there! :bow:

 

[bucktales]

Wow Pitchy, that's nice. :thumbsup:
Seeing you're on the lamp kick, what's next? :hmm:

 

[RC]

Wow Pitchy, that's nice. :thumbsup:
Seeing you're on the lamp kick, what's next? :hmm:

a canoe paddle/walkin stick/knife/hawk.... that lights up! :thumbsup: and looks purdy!

 

[Charles D. Prokopp]

Pitchy, just how do you find time to make all this neat stuff? :hmm:

 

[paulvallandigham]

Very well done, Pitchypine. It resembles and orignal such lamp I saw 15 years ago that belonged to my former mother-in-law, and dated from the 18th century. :thumbsup:

 

[smo]

Nice job Pitchy. :thumbsup:

 

[PitchyPine]

Thanks guys, I got the idea on another board from a bro. I don`t know if he`s here or not, if so chime in bud and take the credit. :thumbsup:
Yep it`s a 18th century lamp, there`s a ladder pieace that the upper pan rests on and as the oil gets low you move it out and that tips the lamp down in the front. The bottom pan catches any drips. I have to do some experimenting, last night i made the wick from rolled up cloth about two inches long but the flame would follow the wick the full length and it made a heck of a fire. Having a long wick doesn`t make sense anyway because why have the tipping pan then. I believe one should use a short wick and have the oil come right up to it on the tip of the pan, it would then maybe only burn up to the fluid thus being the reason for the tipping action. Will let ya know on that.

 

[Nifeman]

Hey Pitchy, what kind of tin snips are ya usin' that throws them sparks :shocked2: . Thats a neat lamp tho, I really like it. What ya using for a wick? Now I gots to make one from copper, if I can find some...Bud

 

[PitchyPine]

That be my new plasma cutter bro and you`ll have to pry my cold dead hand from it to get it. :haha:
What i`m hearing these lamps are very touchy to burn right and i`ll have to get back with ya after i figure it out. :thumbsup:

 

[PitchyPine]

This seams to do the trick, the wick is a rolled up pieace of cloth which they probably would of used and i ran it through a nut. That pointed the wick up and stopped the burn from following the wick down into the oil. :thumbsup:

 

[Roy]

cool :thumbsup:

 

[ameling]

And that little ... tube ... for the wick shows part of the progression from open spoon-shaped grease lamp to that enclosed betty lamp with the wick coming up that tube.

The flame tends to spread down the wick until it gets down to near the level of the grease/oil. Once the grease/oil gets into the wick and gets heated up enough to vaporize, that's where it will burn. A candle works the same way. The wax needs to melt and then get hot enough to vaporize before it actually can burn.

Good work, and run projects to ... tinker on.

Mikey - that grumpy ol' German blacksmith out in the Hinterlands

 

[PitchyPine]

Finished improvement with pick attached. May not be period correct but it sure works good, had it burning for a good 20 minutes. The oil got away from the wick and the tipping mechanism worked perfect.

 

[RickD]

You have to be the handiest person I have ever seen

 

[rabjr]

Nice Pitchy. :thumbsup:

 

[pichou]

Rich isn't on here. But I'll get some pics from him. He has about 20 originals. No joke! :shocked2:

 

[PitchyPine]

Rich isn't on here. But I'll get some pics from him. He has about 20 originals. No joke! :shocked2:

Thanks gents
Ok cool on the pics, thanks. :thumbsup:

 

[Bountyhunter]

Good stuff Lenn.

I drool for one of those plasma cutters.

 

[rifleshooter2]

Very sweet. :thumbsup:

Andy