• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Custom 50 cal Flint Rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 5, 2021
Messages
1,313
Reaction score
1,694
Location
SE PA
Nicely executed full stock flint rifle in 50 cal. Gun is a comfortable handling length, with a 32-inch 7/8 barrel and overall 47 inches nose to butt. Barrel is browned as is the lock, all furniture is brass. A tight-fitted jag does about 1/2 turn in 32", so twist is around 1-60. Bore is bright and shiny. Rear sight was moved forward (old eyes I guess) and the original dovetail has a brass fill.
Stock has nice figure, is a warm brown tone, with LOP 13 1/2 and 1/4" of cast off. Stock shows no dings or scratches.
L&R lock sparks well, trigger is a single that pulls well.

EDIT: I have one detractor to add to the gun: there's a thin brass shim brazed to the bolster of the lock. Rather than inletting the lock another 1/16 or so, the builder shimmed the space between barrel and lock. This may happen if the builder has the main spring getting close to contacting the barrel or ramrod, or if they're worried the lock is getting set too deeply into the mortise. I've had 3 guns by different builders with a thin shim like this. It has not affected their operation in any way, but certainly want to call it out and I believe I have the asking price reflect this.

Asking $1475 with shipping and insurance in the US. Check or MO. PM for details.
 

Attachments

  • PXL_20231001_145941089.jpg
    PXL_20231001_145941089.jpg
    1.6 MB
  • PXL_20231001_145957699.jpg
    PXL_20231001_145957699.jpg
    1 MB
  • PXL_20231001_145620324.jpg
    PXL_20231001_145620324.jpg
    2.4 MB
  • PXL_20231001_145634919.jpg
    PXL_20231001_145634919.jpg
    3.3 MB
  • PXL_20231001_145640837.jpg
    PXL_20231001_145640837.jpg
    1.6 MB
  • PXL_20231001_145650250.jpg
    PXL_20231001_145650250.jpg
    3.2 MB
  • PXL_20231001_145704491.jpg
    PXL_20231001_145704491.jpg
    1.8 MB
  • PXL_20231001_145836212.jpg
    PXL_20231001_145836212.jpg
    2.5 MB
  • PXL_20231001_145849518.jpg
    PXL_20231001_145849518.jpg
    2.3 MB
Last edited:
Forgot barrel photos, and I made a short vid of the lock.
 

Attachments

  • PXL_20230902_002251497~2.mp4
    12.5 MB
  • PXL_20230902_002635148.jpg
    PXL_20230902_002635148.jpg
    1.7 MB
  • PXL_20230902_002715825.jpg
    PXL_20230902_002715825.jpg
    1.7 MB
  • PXL_20231001_145844677.jpg
    PXL_20231001_145844677.jpg
    2.3 MB
  • PXL_20230901_223839969.jpg
    PXL_20230901_223839969.jpg
    2.1 MB
Beautiful rifle. I’d like to discuss details of purchase. PM sent.
 
Last edited:
Status
Not open for further replies.

Latest posts

Back
Top