• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

FOR SALE CVA 12ga SxS

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Shotgun232

36 Cal.
Joined
Sep 12, 2013
Messages
140
Reaction score
44
For sale is a CVA 12ga side by side, that is most likely a kit gun. The barrels have nice browning and the stock appears to have a rubbed oil finish. Overall good condition.
Asking $550 plus $35 shipping anywhere in lower 48.
 

Attachments

  • IMG_9016.jpeg
    IMG_9016.jpeg
    1.6 MB
  • IMG_9015.jpeg
    IMG_9015.jpeg
    1.9 MB
  • IMG_9017.jpeg
    IMG_9017.jpeg
    1.2 MB
  • IMG_9018.jpeg
    IMG_9018.jpeg
    1.5 MB
  • IMG_9019.jpeg
    IMG_9019.jpeg
    1.5 MB
  • IMG_9020.jpeg
    IMG_9020.jpeg
    1.6 MB
How do the inside of the barrels look? Any pitting? Any dents or dings in the barrels? Do you know what chokes the barrels might be?
 
How do the inside of the barrels look? Any pitting? Any dents or dings in the barrels? Do you know what chokes the barrels might be?
The inside of the bores are overall in good condition - no pitting. The left barrel has just the smallest amount of surface rust near the muzzle. Most likely from it sitting in a barn with no oil for 30 years or so.
The bores are otherwise rust free, and generally shiny. Not new, but not completely dull either. When you run a patch through the bore, it comes out clean - no rust.
The barrels are in good condition - no dents. I will have the measure the chokes tomorrow, but I believe all CVAs are cylinder bore.

See the pictures, hopefully it gives you a good idea.
 

Attachments

  • IMG_9037.jpeg
    3.5 MB
  • IMG_9041.jpeg
    IMG_9041.jpeg
    1.7 MB
  • IMG_9043.jpeg
    3.2 MB
  • IMG_9045.jpeg
    3.2 MB
  • IMG_9047.jpeg
    IMG_9047.jpeg
    907.8 KB
  • IMG_9049.jpeg
    3.1 MB
Back
Top