• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

CVA Bobcat replacement rear sight

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vern

32 Cal.
Joined
Aug 29, 2006
Messages
22
Reaction score
0
I just picked up a lightly used CVA Bobcat, .50cal, which my son will hopefully use for his first hunt this year. Seems ok so far, but had a scope at one time (not usable in Colorado) and an after market rear sight which is much higher than it should be (8" high at 100yds when bottomed out). I suspect that a higher rear sight was added so that it could be seen over the scope mount blocks. The sight is dovetailed.

Any idea where I could get a factory type replacement or other replacement?

Thanks.
 
Thanks. I didn't see any parts listed for the Bobcat originally, but will check with them to see if they have a replacement. I'll also look at Track the Wolf.
 
Here's the official word from the Customer Service Manager at CVA: "We no longer carry the sidelock parts. Call Deer Creek at 765-525-6181, they can help you."
:(
 
I put a "Aim Point' from RMC Company. It works great and did not cost a lot. http://rmcsports.com/

ml230.jpg
 
Last edited by a moderator:
Back
Top